Remedy: -Load the appropriate media in the selected source. -Select Continue to clear the message and print the job using a different paper source.
Code: 34
Description: Short Paper The paper used in a print job is too short in length for the current print job.
Remedy: -Select Continue to clear the message and continue printing. The printer does not automatically reprint the page that prompted the message. -Check tray length and width guides to ensure paper is properly fitted in the tray. -Make sure the print job is requesting the correct size of paper. -Adjust the Paper Size setting for the size paper you are using. If MP Feeder Size is set to Universal, make sure the paper is large enough for the formatted data. -Cancel the current job.
Code: 35
Description: Insufficient memory to support Resource Save feature. The printer does not have enough memory to perform the specified task.
Remedy: -Select Continue to disable Resource Save and continue printing. -To enable Resource Save after you get this message: Make sure the link buffers are set to Auto, then exit the menus to activate the link buffer changes. When Ready is displayed, enable Resource Save. -Install additional memory.
Code: 37
Description: Insufficient memory to collate job. The printer does not have enough memory to perform the specified task.
Remedy: -Select Continue to print the portion of the job already stored and begin collating the rest of the job. -Cancel the current job.
Code: 38
Description: Memory Full. Self explanatory
Remedy: -Select Continue to clear the message and continue printing. The job may not print correctly. -Cancel the current job. -Install additional printer memory.
Code: 39
Description: Page is too complex to print. Self explanatory.
Remedy: -Select Continue to clear the message and continue printing. The job may not print correctly. -Cancel the current job. -Install additional printer memory.