Lexmark C532n

• Code: 143-09...143-11, 143-15, 143-17
• Description: Motor Error
  EP Drive assembly cartridge 1 motor has failed
• Remedy: 1 Turn the printer off and remove the rear cover. Check connector JCART1 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If JCART1 cable is damaged, replace JCART1 cable. The cable parts packet contains 1 cartridge motor cable that works for either of the cartridge motors.
  2 Measure the resistance across fuser F4 on the system card. Is fuser blown? Go to “Network system card” for fuse location on the network system card. Go to “Parallel system card” for fuse location on the network system card. Replace system card. Go to “System card removal”. Go to step 3.
  3 Replace EP drive assembly. Go to “Electrophotographic Process (EP) drive assembly removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.

• Code: 143-12, 143-14, 143-16
• Description: Motor Error
  EP Drive assembly cartridge 1 (top) motor has failed.
• Remedy: 1 Turn the printer off and remove the rear cover. Check connector JCART1 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If JCART1 cable is damaged, replace JCART1 cable. The cable parts packet contains one cartridge motor cable that works for either of the cartridge motors.
  2 Measure the resistance across fuser F4 and F5 on the system card. Is either fuser blown? Go to “Network system card” for fuse location on the network system card. Go to “Parallel system card” for fuse location on the network system card. Replace system card. Go to “System card removal”. Go to step 3.
  3 Replace EP drive assembly. Go to “Electrophotographic Process (EP) drive assembly removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.

• Code: 143-18, 143-20...143-25
• Description: Motor Error
  EP Drive assembly cartridge 1 motor has failed
• Remedy: 1 Turn the printer off and remove the rear cover. Check connector JCART1 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If JCART1 cable is damaged, replace JCART1 cable. The cable parts packet contains 1 cartridge motor cable that works for either of the cartridge motors.
  2 Measure the resistance across fuser F4 on the system card. Is fuser blown? Go to “Network system card” for fuse location on the network system card. Go to “Parallel system card” for fuse location on the network system card. Replace system card. Go to “System card removal”. Go to step 3.
  3 Replace EP drive assembly. Go to “Electrophotographic Process (EP) drive assembly removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.

• Code: 144-09, 144-10, 144-11,144-15
• Description: Motor Error
  EP Drive assembly cartridge 2 (bottom) motor has failed.
• Remedy: 1 Turn the printer off and remove the rear cover. Check connector JCART2 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If JCART2 cable is damaged, replace JCART2 cable. The cable parts packet contains one cartridge motor cable that works for either of the cartridge motors.
  2 Measure the resistance across fuser F6 on the system card. Is fuser blown? Go to “Network system card” for fuse location on the network system card. Go to “Parallel system card” for fuse location on the network system card. Replace system card. Go to “System card removal”. Go to step 3.
  3 Replace EP drive assembly. Go to “Electrophotographic Process (EP) drive assembly removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.

• Code: 144-12, 144-13, 144-14, 144-16
• Description: Motor Error
  EP Drive assembly cartridge 2 (bottom) motor has failed.
• Remedy: 1 Turn the printer off and remove the rear cover. Check connector JCART2 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If JCART2 cable is damaged, replace JCART2 cable. The cable parts packet contains one cartridge motor cable that works for either of the cartridge motors.
  2 Measure the resistance across fuser F5 and F6 on the system card. Is either fuser blown? Go to “Network system card” for fuse location on the network system card. Go to “Parallel system card” for fuse location on the network system card. Replace system card. Go to “System card removal”. 3 Replace EP drive assembly. Go to “Electrophotographic Process (EP) drive assembly removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.Go to step 3.
  

• Code: 144-17, 144-18, 144-20...144-25
• Description: Motor Error
  EP Drive assembly cartridge 2 (bottom) motor has failed.
• Remedy: 1 Turn the printer off and remove the rear cover. Check connector JCART2 for proper connection to system card, cable for pinch points and cable or connector for any other damage. Is cable properly connected and damage free? Go to step 2. If connector is damaged on system card, replace system card. Go to “System card removal”. If JCART2 cable is damaged, replace JCART2 cable. The cable parts packet contains one cartridge motor cable that works for either of the cartridge motors.
  2 Measure the resistance across fuser F6 on the system card. Is fuser blown? Go to “Network system card” for fuse location on the network system card. Go to “Parallel system card” for fuse location on the network system card. Replace system card. Go to “System card removal”. Go to step 3.
  3 Replace EP drive assembly. Go to “Electrophotographic Process (EP) drive assembly removal”. Does error clear? Problem solved. Replace system card. Go to “System card removal”.