Description: Hard disk error The hard disk cannot be accessed.
Causes: HDD. Main PWB
Remedy: HDD 1. If an abnormal noise is heard from the HDD, replace the HDD. 2. Check the SATA wiring between the HDD and the main circuit PWB for loose connection, disconnection and damages, and that it is connected into the correct terminal. Main PWB: YC1,YC27 3. Replace the SATA cable. 4. Execute U024 to initialize (FULL) the HDD. 5. If an error is detected after executing U024, replace the HDD. Main PWB Replace the main PWB.
Code: 0650
Description: FAX image DIMM check error A fax image DIMM which was used with another machine is installed.
Causes: FAX DIMM. Main PWB.
Remedy: FAX DIMM. 1. Confirm that a used FAX image DIMM was used instead of the FAX image DIMM contained in the FAX system. 2. If a DIMM that was used with other unit has been installed, execute maintenance mode U671 - Recovery FAX DIMM. 3. Check whether the Fax DIMM is properly inserted into the socket on the main PWB. 4. Replace with a new FAX image DIMM. Main PWB Replace the main PWB.
Code: 0660
Description: Hard disk encryption key error
Causes: EEPROM. HDD. Main PWB
Remedy: EEPROM 1. Execute U004 if this occurs after the EEPROM has been changed. HDD 1. If an abnormal noise is heard from the HDD, replace the HDD. 2. Check the SATA wiring between the HDD and the main circuit PWB for loose connection, disconnection and damages, and that it is connected into the correct terminal. Main PWB: YC1,YC27 3. Replace the SATA cable. 4. Execute U024 to initialize (FULL) the HDD. 5. If an error is detected after executing U024, replace the HDD. Main PWB Replace the main PWB.
Code: 0670
Description: Hard disk overwriting erasure error
Causes: HDD. Main PWB.
Remedy: HDD 1. If an abnormal noise is heard from the HDD, replace the HDD. 2. Check the SATA wiring between the HDD and the main circuit PWB for loose connection, disconnection and damages, and that it is connected into the correct terminal. Main PWB: YC1,YC27 3. Replace the SATA cable. 4. Execute U024 to initialize (FULL) the HDD. 5. If an error is detected after executing U024, replace the HDD. Main PWB Replace the main PWB.
Code: 0800
Description: Image processing error JAM010X is detected twice.
Causes: Main PWB
Remedy: Replace the main PWB.
Code: 0830
Description: FAX control PWB flash program area checksum error A checksum error occurred with the program of the FAX control PWB.
Causes: FAX software. FAX control PWB.
Remedy: FAX software 1. Reinstall the fax software. FAX control PWB 1. Execute initializing by U600.(Refer to the FAX service manual) 2. Replace the FAX control PWB.