PrintCopy.info service

Kyocera KM2050

Error Codes List page 2

  • Code: C0150
  • Description: Backup memory read/write problem (engine PCB)
    • Read and write data does not match.
  • Causes: Defective engine PCB.
  • Remedy: Replace the engine PCB and check for correct operation.
  • Code: C0160
  • Description: Backup memory data problem (engine PCB)
    • Data in the specified area of the backup memory does not match the specified values.
  • Causes: Problem with the backup memory data. Defective backup RAM.
  • Remedy: Turn safety switch off and back on and run maintenance item U020 to set the contents of the backup memory data again. If the C0160 is displayed after re-setting the backup memory contents, replace the engine PCB.
  • Code: C0170
  • Description: Accounting count problem
    •When the power is turned on, the total count and the scan count are abnormal both on the main PCB and the engine PCB.
  • Causes: Defective main PCB or engine PCB.
  • Remedy: Replace the main PCB or engine PCB and check for correct operation.
  • Code: C0180
  • Description: Machine number mismatch
    •When the power is turned on, the machine number does not match between the main PCB and the engine PCB.
  • Causes: Correct EEPROM is not installed. Data damage of EEPROM.
  • Remedy: Install the correct EEPROM. If it does not solve the problem, contact the Service Administrative Division. Contact the Service Administrative Division.
  • Code: C0210
  • Description: Communication problem between the main PCB and engine PCB
    •When the power is turned on, the ma-chine does not detect the low level of SBSY and the high level of SDIR for 10 s.
  • Causes: Poor contact in the connector ter-minals. Defective main PCB or engine PCB.
  • Remedy: Check the connection of connector. Repair or replace if necessary. Replace the main PCB or engine PCB and check for correct operation.
  • Code: C0240
  • Description: Printer board PCB communication problem
    • The printer board PCB does not re-spond 120 s after the power is turned on.
  • Causes: Poor contact in the connector ter-minals. Defective main PCB or printer board PCB.
  • Remedy: Check the connection of connector. Repair or replace if necessary. Replace the main PCB or printer board PCB and check for correct operation.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us