PrintCopy.info service

Konica-Minolta bizhub 658e

Error Codes List page 3

 All About this machine
  • Code: 16-01, 16-40
  • Description: bizhub 368e/308e
    Misfeed at transfer LCT feed/transport section.
    16-01 The leading edge of the paper is not turned ON the vertical transport sensor (PS133) even after the lapse of a given period of time after the transfer LCT starts to feed paper.
    16-40 For paper fed from the transfer LCT, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output.
    - Paper jam of a sheet of paper left at the transfer LCT transport section results, if the vertical transport sensor (PS133) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
    - Paper jam of a sheet of paper left at the transfer LCT transport section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
  • Causes: • Paper feed motor (M131) • Vertical transport motor (M132) • Vertical transport sensor (PS133) • PC control board (PCCB)
  • Remedy: 1 Initial check items - - 2 PS133 I/O check, sensor check PCCB CN4-14 (ON) PC-415 7-J 3 M131 load check • Check code: 28 • Multi code: 1, 2, 3, 4 PCCB CN5-1 to 8 PC-415 5-J 4 M132 load check • Check code: 28 • Multi code: 5, 6, 7, 8 PCCB CN5-9 to 16 PC-415 4-J 5 Replace PCCB.
  • Code: 16-01, 16-40
  • Description: bizhub 658e/558e/458e
    Misfeed at transfer LCT feed/transport section
    16-01 The leading edge of the paper is not turned ON the vertical transport sensor (PS133) even after the lapse of a given period of time after the transfer LCT starts to feed paper.
    16-40 For paper fed from the transfer LCT, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output.
    - Paper jam of a sheet of paper left at the transfer LCT transport section results, if the vertical transport sensor (PS133) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
    - Paper jam of a sheet of paper left at the transfer LCT transport section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
  • Causes: • Paper feed motor (M131) • Vertical transport motor (M132) • Vertical transport sensor (PS133) • PC control board (PCCB)
  • Remedy: 1 Initial check items - - 2 PS133 I/O check, sensor check PCCB CN4-14 (ON) PC-415 7-J 3 M131 load check • Check code: 28 • Multi code: 1, 2, 3, 4 PCCB CN5-1 to 8 PC-415 5-J 4 M132 load check • Check code: 28 • Multi code: 5, 6, 7, 8 PCCB CN5-9 to 16 PC-415 4-J 5 Replace PCCB.
  • Code: 20-01, 20-02
  • Description: bizhub 368e/308e Misfeed at vertical transport section
    20-01 The registration sensor/1 (PS1) is not turned ON (unblocked) even after the lapse of a given period of time after the paper has turned ON the tray 2 vertical transport sensor (PS19).
    20-02 For paper fed from the tray 2, tray 3, tray 4, or LCT, loop forming has not been complete before a sheet enters the registration roller because the rise timing of load to perform registration is earlier than the rise timing of load to form a loop.
  • Causes: • Transport motor (M1) • Tray 2 vertical transport motor (M23) • Registration clutch (CL4) • Registration sensor/1 (PS1) • Tray 2 vertical transport sensor (PS19) • Front side board (FRB) • MFP board (MFPB)
  • Remedy: 1 Initial check items - - 2 PS1 I/O check, sensor check FRB CN8-3 (ON) 6-L 3 PS19 I/O check, sensor check MFPB CN23E-2 (ON) 27-C 4 CL4 load check • Check code: 21 • Multi code: 2 FRB CN8-7 (CL4_24V) 5-L 5 M1 load check • Check code: 40 • Multi code: 1, 2, 3, 4 MFPB CN8E-3 (REM) MFPB CN8E-6 (FGP) 2-C 6 M23 load check • Check code: 28 • Multi code: 29, 30, 31, 32 MFPB CN16E-5 to 8 14-C 7 Replace FRB. - - 8 MFPB ICP1E conduction check - - 9 Replace MFPB.
  • Code: 20-01, 20-02, 20-04
  • Description: bizhub 658e/558e/458e Misfeed at vertical transport section.
    20-01 The registration sensor/1 (PS1) is not turned ON (unblocked) even after the lapse of a given period of time after the paper has turned ON the tray 2 vertical transport sensor (PS19).
    20-02 For paper fed from the tray 2, tray 3, tray 4, or LCT, loop forming has not been complete before a sheet enters the registration roller because the rise timing of load to perform registration is earlier than the rise timing of load to form a loop.
    20-04 The registration sensor/2 (PS72) is not turned ON (unblocked) even after the lapse of a given period of time after the paper has turned ON the tray 2 vertical transport sensor (PS19). (bizhub 658e/558e only)
  • Causes: • Transport motor (M1) (bizhub 558e/458e) • Tray 2 vertical transport motor (M23) • Registration motor (M24) (bizhub 658e) • Registration clutch (CL4) (bizhub 558e/458e) • Registration sensor/1 (PS1) • Registration sensor/2 (PS72) (bizhub 658e/558e) • Tray 2 vertical transport sensor (PS19) • Expansion control board (EXCB) • Front side board (FRB) • MFP board (MFPB)
  • Remedy: 1 Initial check items - - 2 PS1 I/O check, sensor check EXCB CN6-3 (ON) 26-P 3 PS72 I/O check, sensor check EXCB CN6-5 (ON) 26-P 4 PS19 I/O check, sensor check MFPB CN34E<A>-2 (ON) 26-I 5 CL4 load check • Check code: 21 • Multi code: 2 FRB CN8-7 (CL4_REM) 4-K 6 M1 load check • Check code: 40 • Multi code: 1, 2, 3, 4 MFPB CN14E-3 (REM) MFPB CN14E-6 (LOCK) 1-C 7 M23 load check • Check code: 28 • Multi code: 29, 30, 31, 32 EXCB CN7-9 to 12 25-P 8 M24 load check • Check code: 26 • Multi code: 1, 2, 3, 4 EXCB CN7-1 to 4 26-P 9 Replace FRB. - - 10 Replace EXCB. - - 11 MFPB F1E conduction check - - 12 Replace MFPB.
  • Code: 20-21
  • Description: bizhub 368e/308e Misfeed at vertical transport section (tray 3)
    20-21 <When PC-115 or PC-215 is installed> The tray 2 vertical transport sensor (PS19) is not turned ON even after the lapse of a given period of time after the tray 3 vertical transport sensor (PS113) has been blocked by a paper. <When PC-415 is installed> The tray 2 vertical transport sensor (PS19) is not turned ON even after the lapse of a given period of time after the vertical transport sensor (PS133) has been blocked by a paper.
    - Paper jam of a sheet of paper left at the vertical transport section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
  • Causes: <When PC-115 or PC-215 is installed> • Tray 2 vertical transport motor (M23) • Tray 3 vertical transport motor (M112) • Tray 2 vertical transport sensor (PS19) • Tray 3 vertical transport sensor (PS113) • MFP board (MFPB) • PC control board (PCCB)
    <When PC-415 is installed> • Tray 2 vertical transport motor (M23) • Vertical transport motor (M132) • Tray 2 vertical transport sensor (PS19) • Vertical transport sensor (PS133) • MFP board (MFPB) • PC control board (PCCB)
  • Remedy: (a) When PC-115 or PC-215 is installed: 1 Initial check items - - 2 PS113 I/O check, sensor check PCCB CN4-14 (ON) PC-115/PC-215 5-C 3 PS19 I/O check, sensor check MFPB CN23E-2 (ON) 27-C 4 M112 load check • Check code: 28 • Multi code: 17, 18, 19, 20 PCCB CN5-9 to 16 PC-115/PC-215 3 to 4-C 5 M23 load check • Check code: 28 • Multi code: 29, 30, 31, 32 MFPB CN16E-5 to 8 14-C 6 MFPB ICP1E conduction check - - 7 Replace MFPB. - - 8 Replace PCCB.
    (b) When PC-415 is installed: 1 Initial check items - - 2 PS133 I/O check, sensor check PCCB CN4-14 (ON) PC-415 7-J 3 PS19 I/O check, sensor check MFPB CN23E-2 (ON) 27-C 4 M132 load check PCCB CN5-9 to 16 PC-415 4-J • Check code: 28 • Multi code: 5, 6, 7, 8 5 M23 load check • Check code: 28 • Multi code: 29, 30, 31, 32 MFPB CN16E-5 to 8 14-C 6 MFPB ICP1E conduction check - - 7 Replace MFPB. - - 8 Replace PCCB.
  • Code: 20-21
  • Description: bizhub 658e/558e/458e Misfeed at vertical transport section (tray 3)
    20-21 <When PC-115 or PC-215 is installed> The tray 2 vertical transport sensor (PS19) is not turned ON even after the lapse of a given period of time after the tray 3 vertical transport sensor (PS113) has been blocked by a paper. <When PC-415 is installed> The tray 2 vertical transport sensor (PS19) is not turned ON even after the lapse of a given period of time after the vertical transport sensor (PS133) has been blocked by a paper.
    - Paper jam of a sheet of paper left at the vertical transport section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
  • Causes: <When PC-115 or PC-215 is installed> • Tray 2 vertical transport motor (M23) • Tray 3 vertical transport motor (M112) • Tray 2 vertical transport sensor (PS19) • Tray 3 vertical transport sensor (PS113) • Expansion control board (EXCB) • MFP board (MFPB) • PC control board (PCCB) <When PC-415 is installed> • Tray 2 vertical transport motor (M23) • Vertical transport motor (M132) • Tray 2 vertical transport sensor (PS19) • Vertical transport sensor (PS133) • Expansion control board (EXCB) • MFP board (MFPB) • PC control board (PCCB)
  • Remedy: (a) When PC-115 or PC-215 is installed: 1 Initial check items - - 2 PS113 I/O check, sensor check PCCB CN4-14 (ON) PC-115/PC-215 5-C 3 PS19 I/O check, sensor check MFPB CN34E<A>-2 (ON) 26-I 4 M112 load check • Check code: 28 • Multi code: 17, 18, 19, 20 PCCB CN5-9 to 16 PC-115/PC-215 3 to 4-C 5 M23 load check • Check code: 28 • Multi code: 29, 30, 31, 32 EXCB CN7-9 to 12 25-P 6 Replace EXCB. 7 MFPB F1E conduction check - - 8 Replace MFPB. - - 9 Replace PCCB.
    (b) When PC-415 is installed: 1 Initial check items - - 2 PS133 I/O check, sensor check PCCB CN4-14 (ON) PC-415 7-J 3 PS19 I/O check, sensor check MFPB CN34E<A>-2 (ON) 26-I 4 M132 load check • Check code: 28 • Multi code: 5, 6, 7, 8 PCCB CN5-9 to 16 PC-415 4-J 5 M23 load check • Check code: 28 • Multi code: 29, 30, 31, 32 EXCB CN7-9 to 12 25-P 6 Replace EXCB. - - 7 MFPB F1E conduction check - - 8 Replace MFPB. - - 9 Replace PCCB.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us