PrintCopy.info service

Konica-Minolta bizhub 5000i

Error Codes List page 1

  • Code: 0102
  • Description: Communication error between the engine ASIC and motor driver or faulty motor driver.
  • Remedy: 1 Connection failure of the paper feed motor harness.
    Reconnect the paper feed motor harness.
    2 Paper feed motor failure.
    Replace the paper feed motor.
    3 Main PCB failure.
    Replace the main PCB ASSY.
  • Code: 0201
  • Description: Cannot detect the synchronized signal of the paper feed motor. The speed of the paper feed motor does not stabilize within the specified time.
  • Remedy: 1 Connection failure of the paper feed motor harness.
    Reconnect the paper feed motor harness.
    2 Damaged fuser gear.
    Replace the fuser gear.
    3 Paper feed motor failure.
    Replace the paper feed motor.
    4 Damaged fuser unit.
    Replace the fuser unit.
    5 Low-voltage power supply PCB
    failure.
    Replace the low-voltage power supply PCB ASSY.
    6 Damaged part in drive sub ASSY.
    Replace the main frame L ASSY.
    7 Main PCB failure.
    Replace the main PCB ASSY.
  • Code: 0203
  • Description: Eject motor failure was detected.
  • Remedy: 1 Connection failure of the eject motor harness.
    Reconnect the eject motor harness.
    2 Eject motor failure.
    Replace the eject motor.
    3 Low-voltage power supply PCB failure.
    Replace the low-voltage power supply PCB ASSY.
    4 Damaged part in eject gears.
    Replace the main frame L ASSY.
    5 Main PCB failure.
    Replace the main PCB ASSY.
  • Code: 0300
  • Description: Cannot detect the lock signal of the polygon motor for the laser unit (second time).
  • Remedy: 1 Connection failure of the laser unit flat cable.
    Reconnect the laser unit flat cable.
    2 Laser unit flat cable failure.
    Replace the laser unit flat cable.
    3 Laser unit failure.
    Replace the laser unit.
    4 Main PCB failure.
    Replace the main PCB ASSY.
  • Code: 0305
  • Description: Cannot detect the lock signal of the polygon motor for the laser unit (first time).
  • Remedy: 1 Connection failure of the laser unit flat cable.
    Reconnect the laser unit flat cable.
    2 Laser unit flat cable failure.
    Replace the laser unit flat cable.
    3 Laser unit failure.
    Replace the laser unit.
    4 Main PCB failure.
    Replace the main PCB ASSY.
  • Code: 0401
  • Description: Cannot detect the synchronized signal of the polygon motor for the laser unit (second time).
  • Remedy: 1 Connection failure of the laser unit flat cable.
    Reconnect the laser unit flat cable.
    2 Laser unit flat cable failure.
    Replace the laser unit flat cable.
    3 Laser unit failure.
    Replace the laser unit.
    4 Main PCB failure.
    Replace the main PCB ASSY.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us