Description: FS-511:Tray lift motor (M7) drive abnormality.
- While in the main tray up drive, the main tray upper limit sensor (PS19) does not turn ON within a specified period of time after M7 turns ON.
- While in the main tray down drive, the lock signal of M7 is detected.
- While in the M7 ON, the main tray upper limit switch (SW2) or the main tray lower limit switch (SW3) turns ON.
Causes: Tray lift motor (M7) Main tray upper limit sensor (PS19) FS control board (FSCB)
Code: C-1103
Description: FS-511: Alignment motor (M5) drive abnormality.
- While in the alignment home position search, the alignment home sensor (PS9) does not turn ON within a specified period of time after M5 turns ON.
- While in the alignment operation, PS9 does not turn OFF within a specified period of time after M5 turns ON.
Causes: Alignment motor (M5) Alignment home sensor (PS9) FS control board (FSCB)
Code: C-1104
Description: FS-511: Paper exit roller release motor (M13) drive abnormality.
- When starting the pressure position drive, the exit roller home sensor (PS13) does not turn ON within a specified period of time after M13 turns ON.
- When starting the separation position drive, PS13 does not turn OFF within a specified period of time after M13 turns ON.
Causes: Paper exit roller release motor (M13) Exit roller home sensor (PS13) FS control board (FSCB)
Code: C-1105
Description: FS-511: Intermediate conveyance roller release motor (M12) drive abnormality.
- When starting the pressure position drive, the roller release home sensor (PS12) does not turn ON within a specified period of time after M12 turns ON.
- When starting the separation position drive, PS12 does not turn OFF within a specified period of time after M12 turns ON.
Causes: Intermediate conveyance roller release motor (M12) Roller release home sensor (PS12) FS control board (FSCB)
Code: C-1106
Description: FS-511: Stapler movement motor (M6) drive abnormality.
- While in the home position search, the stapler home sensor (PS14) does not turn ON within a specified period of time after M6 turns ON.
- While in the 1-staple position movement, PS14 does not turn OFF within a specified period of time after M6 turns ON.
Causes: Stapler movement motor (M6) Stapler home sensor (PS14) FS control board (FSCB)
Code: C-1107
Description: FS-511: Stapler motor /Rr (M16) drive abnormality
- The stapler home sensor /Rr (PS22) does not turn OFF within a specified period of time after M16 turns ON.
- PS22 does not turn ON within a specified period of time after the OFF of PS22 is detected.
- PS22 does not turn ON within a specified period of time after M16 turns ON for reverse rotation.
Causes: Stapler motor /Rr (M16) Stapler home sensor /Rr (PS22) FS control board (FSCB)