Description: Firmware update error
Firmware update fails to complete correctly during update.
Remedy: 1 Reboot the main unit. 2 Check the cable that has been used for update of the firmware for proper connection and correct as necessary. 3 Check the firmware update file and if the file is not the correct one, update the firmware again. 4 Check the firmware update procedure and if the procedure is not correct, update the firmware again. 5 Update the firmware again. 6 Check the MFPB connector for proper connection and correct as necessary. 7 Change MFPB.
Code: C072
Description: Counter not installed
The total counter (CNT) is not installed.
Remedy: 1 Reboot the main unit. 2 Check the connector between CNT-PRCB CN15 for proper connection and correct as necessary. 3 Change PRCB.
Code: C073
Description: Finisher not connected
Connection status error for the finisher FS-529 is occurred.
Remedy: 1 Check the connection status of the finisher FS-529, and modify as necessary. 2 Change FSCB. 3 Change PRCB.
Code: C074
Description: Engine ROM error
ROM on the printer control board has error.
Remedy: ROM on the printer control board has error.
Code: C075
Description: Large Paper Size Kit error
The installed large paper size kit is not compatible with the marketing area for which the MFP board is destined.
Remedy: 1 Install the large paper size kit appropriate for the marketing area. 2 Change MFPB.
Code: C076
Description: Copy Kit Counter error
The current count value of the copy kit counter reaches the setting configured in [Max. Allowance Set].
Remedy: 1 Increase the setting configured in [Max. Allowance Set] and turn the power switch OFF and ON. I.10.6 Copy Kit Counter 2 If the copy kit counter is not used, change the copy kit counter count setting to mode 1 and then turn the power switch OFF and ON. I.10.5 Copy Kit Counter Count 3 Change MFPB.