Description: HDD access error
• When correct access to the Hard Disk Kit is failed during access.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the HDD connector for proper connection and correct as necessary. 3 Check the PWB-P connector for proper connection and correct as necessary. 4 Change HDD. 5 Change PWB-P.
Code: C051
Description: HDD full error
• Range for user space is full during access to the Hard Disk Kit.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the HDD connector for proper connection and correct as necessary. 3 Change HDD.
Code: C052
Description: Compact Flash access error
• When correct access to the Compact Flash is failed during access.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the Compact Flash for proper connection and correct as necessary. 3 Check the PWB-P connector for proper connection and correct as necessary. 4 Change Compact Flash. 5 Change PWB-P.
Code: C053
Description: Compact Flash full error
• Range for user space is full during access to the Compact Flash.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the Compact Flash for proper connection and correct as necessary. 3 Change Compact Flash.
Code: C054
Description: Compact Flash uninstallation
• Compact Flash is not installed while accessing to the Compact Flash.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the Compact Flash for proper connection and correct as necessary. 3 Check the PWB-P connector for proper connection and correct as necessary. 4 Change Compact Flash. 5 Change PWB-P.
Code: C060
Description: Firmware update error
• Firmware update fails to complete correctly during update.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the cable that has been used for update of the firmware for proper connection and correct as necessary. 3 Update the firmware again. 4 Check the PWB-P connector for proper connection and correct as necessary. 5 Change PWB-P.