Konica-Minolta Di2510

• Code: C0B56
• Description: Saddle Staple 1 Drive Failure
• Remedy:

• Code: C0B57
• Description: Saddle Staple 2 Drive Failure
• Remedy:

• Code: C0B73
• Description: Punch Cam Motor Unit Failure
• Remedy:

• Code: C0BA0
• Description: Elevator Motor Ascent/ Descent Drive Failure
• Remedy:

• Code: C0BC2
• Description: Crease Motor Drive Failure
• Remedy:

• Code: C0F32
• Description: ATDC Sensor Failure
  • The scanning value of the ATDC Sensor is less than 7% while the Imaging Unit Motor is turning. • The scanning value of the ATDC Sensor is more than 19% while the Imaging Unit Motor is turning.
• Remedy: 1 Check the ATDC sensor connector for proper connection, and correct as necessary. 2 Remove the Developing Unit from the Imaging Unit, and then replace UN2. 3 Run F8. 4 Replace PWB-A. 5 Replace PU1.