KIP C7800
Error Codes List page 11
|
- Code: J-0111
- Description: Lower Feeder Jam: Power ON
- Causes:
- Remedy: 1 Have you removed all jammed sheets in the media path? No Clear the media path.
Harness 2 Is the wiring OK between Media Sensor (PH45, PH46, PH47) and Dev Drive PCB (PW12555D)? No Correct it
Media Sensor (PH45, PH46, PH47) 3 Can the problem be fixed by replacing the sensor? Yes OK
Dev Drive PCB (PW12555D) 4 Can the problem be fixed by replacing the PCB? Yes OK
Main Control PCB (PW12520) 5 Can the problem be fixed by replacing the Main Control PCB? Yes OK
- Code: J-0112
- Description: Registration Jam: Power ON
- Causes:
- Remedy: 1 Have you removed all jammed sheets in the media path? No Clear the media path.
Harness 2 Is the wiring OK between Registration Sensor (PH3) and Fuser Drive PCB (PW12556)? No Correct it
Registration Sensor (PH3) 3 Can the problem be fixed by replacing the sensor? Yes OK
Fuser Drive PCB (PW12556) 4 Can the problem be fixed by replacing the PCB? Yes OK
Main Control PCB (PW12520) 5 Can the problem be fixed by replacing the Main Control PCB? Yes OK
- Code: J-0131
- Description: Fuser Jam: Power ON
- Causes:
- Remedy: 1 Have you removed all jammed sheets in the media path? No Clear the media path.
Harness 2 Is the wiring OK between Exit Sensor (PH7) and Fuser Drive PCB (PW12556)? No Correct it
Exit Sensor (PH7) 3 Can the problem be fixed by replacing the sensor? Yes OK
Fuser Drive PCB (PW12556) 4 Can the problem be fixed by replacing the PCB? Yes OK
Main Control PCB (PW12520) 5 Can the problem be fixed by replacing the Main Control PCB? Yes OK
- Code: J-0201
- Description: Roll Deck 1 Jam: LE Delay
- Causes:
- Remedy: Harness 1 Is the wiring OK between the followings? Media Sensor (PH11) Roll Deck 1 Drive Motor (M1) Roll 1 Feed Clutch (CL1) Fuse F7 Deck Drive PCB (PW12557A) Media Sensor (PH44) Dev Drive PCB (PW12555C) No Correct it
Media Sensor (PH11, PH44) 2 Run Service Software “input check” to monitor the status of the sensor. 0604: PH11 020A: PH44 Does the status change by loading / removing media? No Replace the sensor. If still unsettled, replace the related PCB. PH11: PW12557A PH44: PW12555C
Roll Deck 1 Drive Motor (M1) Roll 1 Feed Clutch (CL1) 3 Run Service Software “output check” to monitor the motion of the motor / clutch. 0700: Roll Deck 1 Drive Motor (M1) 0704: Roll 1 Feed Clutch (CL1) Does the motor / clutch operate? No Check for continuity of Fuse F7. Fuse OK: Replace the motor or the clutch. If still unsettled, replace Deck Drive PCB. Fuse broken: Check all the downstream components to eliminate the root cause first, and then replace the fuse.
Main Control PCB (PW12520) 4 Can the problem be fixed by replacing the Main Control PCB? Yes OK
- Code: J-0202
- Description: Roll Deck 2 Jam: LE Delay
- Causes:
- Remedy: Harness 1 Is the wiring OK between the followings? Media Sensor (PH16) Roll Deck 2 Drive Motor (M2) Roll 2 Feed Clutch (CL3) Fuse F7 Deck Drive PCB (PW12557B) Media Sensor (PH54) Dev Drive PCB (PW12555D) No Correct it
Media Sensor (PH16, PH54) 2 Run Service Software “input check” to monitor the status of the sensor. 0704: PH16 030C: PH54 Does the status change by loading / removing media? No Replace the sensor. If still unsettled, replace the related PCB. PH16: PW12557B PH54: PW12555D
Roll Deck 2 Drive Motor (M2) Roll 2 Feed Clutch (CL3) 3 Run Service Software “output check” to monitor the motion of the motor / clutch. 0800: Roll Deck 2 Drive Motor (M2) 0804: Roll 2 Feed Clutch (CL3) Does the motor / clutch operate? No Check for continuity of Fuse F7. Fuse OK: Replace the motor or the clutch. If still unsettled, replace Deck Drive PCB. Fuse broken: Check all the downstream components to eliminate the root cause first, and then replace the fuse.
Main Control PCB (PW12520) 4 Can the problem be fixed by replacing the Main Control PCB? Yes OK
- Code: J-0203
- Description: Roll Deck 3 Jam: LE Delay
- Causes:
- Remedy: Harness 1 Is the wiring OK between the followings? Media Sensor (PH21) Media Sensor (PH22) Roll Deck 3 Drive Motor (M3) Roll 3 Feed Clutch (CL5) Fuse F7 Deck Drive PCB (PW12557B) No Correct it
Media Sensor (PH21, PH22) 2 Run Service Software “input check” to monitor the status of the sensor. 0804: PH21 0805: PH22 Does the status change by loading / removing media? No Replace the sensor. If still unsettled, replace the Deck Driver PCB.
Roll Deck 3 Drive Motor (M3) Roll 3 Feed Clutch (CL5) 3 Run Service Software “output check” to monitor the motion of the motor / clutch. 0900: Roll Deck 3 Drive Motor (M3) 0904: Roll 3 Feed Clutch (CL5) Does the motor / clutch operate? No Check for continuity of Fuse F7. Fuse OK: Replace the motor or the clutch. If still unsettled, replace Deck Drive PCB. Fuse broken: Check all the downstream components to eliminate the root cause first, and then replace the fuse.
Main Control PCB (PW12520) 4 Can the problem be fixed by replacing the Main Control PCB? Yes OK