Causes: Yellow Ink Cartridge: A broken bag has been detected in the ink cartridge. This error must be solved and the printer checked and cleared of this error code before the printer can resume printing.
Remedy: 1. Remove the ink cartridge and check for any ink leaking from the cartridge. In some extreme cases: • Ink can leak from the damaged ink cartridge and contaminate the pressurized air system, or; • Air can get inside the Ink System causing bubbles in the Ink Tubes, which can damage the printheads. 2. For this issue perform the h3.3.2 Recover Broken Bag Diagnostic procedure. 3. If the ISS Bottom PCA has been damaged by ink, and cannot be repaired; it must be replaced.
Code: 26.07:10
Description: Broken Bag. K (PIP 7)
Causes: Black Ink Cartridge: A broken bag has been detected in the ink cartridge. This error must be solved and the printer checked and cleared of this error code before the printer can resume printing.
Remedy: 1. Remove the ink cartridge and check for any ink leaking from the cartridge. In some extreme cases: • Ink can leak from the damaged ink cartridge and contaminate the pressurized air system, or; • Air can get inside the Ink System causing bubbles in the Ink Tubes, which can damage the printheads. 2. For this issue perform the h3.3.2 Recover Broken Bag Diagnostic procedure. 3. If the ISS Bottom PCA has been damaged by ink, and cannot be repaired; it must be replaced.
Code: 27.1:00
Description: Several nozzles out detected in Optimizer PH
Causes: Several nozzles out detected in Optimizer PH: If print quality is not acceptable replace the PH.
Remedy: Service engineer: • Check the IQ. If required, recover or replace the PH.
Code: 27.1:01
Description: Error due to a high number of nozzles out in printhead slot 1
Causes: High number of nozzles out in printhead slot 1.
Remedy: Service engineer: 1. Clean all the printheads and check their status. 2. Replace the printhead.
Code: 27.2:01
Description: Error due to a high number of nozzles out in printhead slot 2
Causes: High number of nozzles out in printhead slot 2.
Remedy: Service engineer: 1. Clean all the printheads and check their status. 2. Replace the printhead.
Code: 27.3:01
Description: Error due to a high number of nozzles out in printhead slot 3
Causes: High number of nozzles out in printhead slot 3.
Remedy: Service engineer: 1. Clean all the printheads and check their status. 2. Replace the printhead.