Description: The product has detected a jam in the location indicated in the message.
Remedy: Clear the jam from the area indicated in the message, and then follow the control-panel instructions. Clearing some jams requires you to open the top cover and remove the print cartridge.
Code: -
Display: Load tray 1 PLAIN <SIZE>
Description: The product is performing a cleaning cycle.
Remedy: Load the tray with plain paper of the size indicated. Press the OK button to start the cleaning cycle.
Code: -
Display: Load tray <TYPE>, <SIZE>
Description: The tray is empty.
Remedy: Load the tray with the correct type and size of paper.
Code: -
Display: Manual duplex
Description: The product is processing a manual duplex job.
Remedy: To print the second side, place the pages face down in the tray with the top edge first.
Code: -
Display: Manual feed <SIZE>, <TYPE>
Description: The product is set for the manual feed mode.
Remedy: Load the tray with the correct size and type of paper, or press the OK button to use the paper that is in the tray.
Code: -
Display: Memory is low
Description: The product does not have enough memory to process the job.
Remedy: If the product is processing other jobs, send the job again after those jobs have finished. If the problem continues, turn off the power by using the power switch, and then wait at least 30 seconds. Turn on the power and wait for the product to initialize.