PrintCopy.info service

HP LaserJet Enterprise MFP M630

Error Codes List page 2

  • Code: 10.XX.40
  • Display: 10.XX.40 Genuine HP Supplies Installed
  • Description: A genuine HP print cartridge has been installed. • 10.00.40 (event code) Black print cartridge
  • Remedy: No action necessary.
  • Code: 10.XX.41
  • Display: 10.XX.41 Unsupported Supply In Use
  • Description: The installed print cartridge is for a different product. • 10.00.41 (event code) Black print cartridge
  • Remedy: Remove the print cartridge, and then install the correct cartridge for this product.
  • Code: 10.XX.70
  • Display: 10.XX.70 Printing past very low
  • Description: The product indicates when a supply level is very low. The actual remaining print cartridge life might vary. You do not need to replace the print cartridge at this time unless print quality is no longer acceptable. • 10.00.70 (event code) Black print cartridge
  • Remedy: If print quality is no longer acceptable, replace the print cartridge. See the parts chapter in the service manual for the correct cartridge part number.
  • Code: 10.YY.15
  • Display: 10.YY.15 Install <supply>
  • Description: The indicated supply has been removed or installed incorrectly. • 10.00.70 (event code) Black print cartridge • 10.23.15 (event code) Fuser kit
  • Remedy: Replace or install the indicated supply. See the parts chapter in the service manual for the correct supply or kit part number.
  • Code: 10.YY.35
  • Display: 10.YY.35 Incompatible <supply>
  • Description: The indicated supply is not compatible with this product. • 10.00.35 (event code) Black print cartridge • 10.23.35 (event code) Fuser kit
  • Remedy: Install a supply that is designed for this product. See the parts chapter in the service manual for the correct supply part number.
  • Code: 11.00.01
  • Display: 11.00.01 or 11.00.02 Internal clock error
  • Description: The product real time clock has experienced an error. 01=dead clock 02=dead real time clock
  • Remedy: 1. Whenever the product is turned off and then turned on again, set the time and date on the control panel. 2. If the error persists, you might need to replace the formatter.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us