Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Replace the Power Supply Unit (PSU) refer Electronics Module (Main PCA and PSU). • If the System Error continues, replace the Main PCA refer Electronics Module (Main PCA and PSU).
Code: 06:YZ
Description: Main NVM failure - not detected, read/write failed or readback error.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the System Error continues, replace the Formatter refer Formatter.
Code: 08:YZ
Description: Problem with the Front Panel.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Front Panel interface cable is not damaged and is correctly connected between the Main PCA and the Front Panel. • Check that the memory module in the Formatter is installed correctly • Check that the connections between the Formatter, the Formatter and the Formatter are not damaged and are correctly connected. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • If the System Error continues, replace the Main PCA refer Electronics Module (Main PCA and PSU). • If the System Error continues, replace the Formatter refer Formatter. • If the System Error continues, replace the Front Panel refer Front Panel.
Code: 11:YZ
Description: Trailing Cable does not seem to be detected.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Trailing Cable is not damaged. • Check that the Trailing Cable is correctly connected between the Main PCA and Carriage PCA. • If the System Error continues, replace the Formatter refer Formatter. • If the System Error continues, replace the Main PCA refer Electronics Module (Main PCA and PSU). • If the System Error continues, replace the Carriage PCA refer Carriage PCA.
Code: 12.n:YZ
Description: Carriage & PCA Main doesn’t detect pens.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Trailing Cable is not damaged. • Check that the Trailing Cable is correctly connected between the Main PCA and Carriage PCA. • Check that the Printhead has not failed and is not erroneous. • Check that the Flex circuit contacts and Printhead contacts are clean. • If the System Error continues, replace the Carriage PCA refer Carriage PCA. • If the System Error continues, replace the Main PCA refer Electronics Module (Main PCA and PSU).
Code: 21.1:YZ
Description: Service Station servo shutdown.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Check the Primer Tubes. Reconnect the power cord and power On the Printer. • Perform the Service Station diagnostic test to troubleshoot the problem further 8. Service Station. • If the System Error continues, replace the Service Station refer Service Station. • If the System Error continues, replace the PrintMech PCA refer PrintMech PCA.