Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Check the Primer Tubes. Reconnect the power cord and power On the Printer. • Make sure that the Service Station path is clear. Remove any visible obstacles (e.g. screws, plastic parts, etc...) restricting the movement of the Service Station. • Perform the Service Station diagnostic test to troubleshoot the problem further 8. Service Station. • If the System Error continues, replace the Service Station refer Service Station. • If the System Error continues, replace the PrintMech PCA refer PrintMech PCA.
Code: 22.0:YZ
Description: ISS Left BPS0 error.(Supplies 0, 1, 2) (Module 0 left).
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the cables between the Left Ink Supply Station and Main PCA the are not damaged and are correctly connected. • Perform the Ink Delivery System diagnostic test to troubleshoot the problem further 7. Ink Delivery System (IDS). • If the System Error continues, replace the Left Ink Supply Station refer Left Ink Supply Station. • If the System Error continues, replace the Main PCA refer Electronics Module (Main PCA and PSU).
Code: 22.1:YZ
Description: ISS Left BPS1 error.(Supplies 3, 4, 5)(Module1 middle right).
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the cables between the Left Ink Supply Station and PrintMech PCA the are not damaged and are correctly connected. • Perform the Ink Delivery System diagnostic test to troubleshoot the problem further 7. Ink Delivery System (IDS). • If the System Error continues, replace the Right Ink Supply Station refer Right Ink Supply Station • If the System Error continues, replace the PrintMech PCA refer PrintMech PCA.
Code: 22.2:YZ
Description: ISS Right BPS0 error.(Supplies 0, 1, 2)(Module 2 far right).
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the cables between the Right Ink Supply Station and PrintMech PCA the are not damaged and are correctly connected. • Perform the Ink Delivery System diagnostic test to troubleshoot the problem further 7. Ink Delivery System (IDS). • If the System Error continues, replace the Right Ink Supply Station refer Right Ink Supply Station. • If the System Error continues, replace the Main PCA refer Electronics Module (Main PCA and PSU).
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the cables between the Right Ink Supply Station and PrintMech PCA the are not damaged and are correctly connected. • Try purging the Ink Supply Tubes again once the Printer has been restarted. • Install new Cartridges in the printer and try purging the Ink Supply Tubes again.
Code: 26.n:YZ
Description: (color = n) Order of Ink Supplies incorrect.
Remedy: • Remove the Ink Supply Cartridges and check that they are the correct ones for this printer and are in the proper order. • Check that the Printer has the latest firmware. If not, update the firmware to the latest version.