Catalog
Sign In
Contacts
Forum
Eng
HP DesignJet 110
Error Codes List page 1
Error Code:
All codes
01:10
01:11
01:12
02:10
04:13
08:11
11:10
11:11
21:10
22:10
270:00
271:00
272:00
273:00
274:00
275:00
35:01
42:10
56:10
58:10
61:05
64:04
65:01
65:04
66:02:1
66:02:2
71:03
71:14
72:04
74:12
79:04
81:01
83:01:1
83:10
85:10
86:01
86:11
941:02:1
941:02:2
941:02:3
941:02:4
941:02:5
94:02:1
94:02:3
94:02:4
94:02:5
94:02:6
94:02:7
94:02:8
94:04
94:08
94:10
95:00
95:02
95:04
page
1
2
3
4
5
6
7
8
9
10
Code: 01:10Description: Electronics Module failure.Remedy: Replace the Electronics Module
Code: 01:11Description: The Electronics Module is incorrectly positioned.Remedy: Reseat the Electronics Module by Removing it from the Printer and installing it again in the correct position.
Code: 01:12Description: Electronics Module failed during the firmware upgrade OR the ElectronicsRemedy: Module failed during initialization.
Code: 02:10Description: Carriage failure.Remedy: Replace the Carriage Assembly
Code: 02:10Description: Carriage failure.Remedy: Replace the Carriage Assembly
Code: 04:13Description: Generic Firmware Error (Network Card).Remedy: Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared. If the error code continue