PrintCopy.info service

HP Color LaserJet CP5220 Series

Error Codes List page 1

  • Code: -
  • Display: Front door open
  • Description: CLOSE FRONT DOOR message appears although the door is closed.
  • Remedy: 1. Reconnect the connector (J708) of the 24V interlock switch and the connector (J121X) on the DC controller PCA. 2. Check the sensor flag of the front door. If it is damaged, replace the front door sensor unit. Close the door.
  • Code: -
  • Display: Right door open
  • Description: CLOSE RIGHT DOOR message appears although the door is closed.
  • Remedy: 1. Reconnect the connector (J708) of the 24V interlock switch and the connector (J121X) on the DC controller PCA. 2. Check the sensor flag of the right door. If it is damaged, replace the right door sensor unit. Close the door.
  • Code: -
  • Display: Unexpected size in tray # Load <size> press [OK]
  • Description: SIZE MISMATCH message appears although the media is loaded on the configured pickup source with correct size
  • Remedy: 1. Run the switch test in the sensor monitor mode to verify that the corresponding media width switch and media end width switch are functioning correctly. 2. Reconnect the corresponding connector of the switch: • Printer cassette: Intermediate connector (J742) and the connector (J151) on the DC controller PCA. • PF cassette: Connector (J2007) on the PF controller PCA.
  • Code: 10.10.XX
  • Display: 10.10.XX Supply error
  • Description: • 10.1000 = black supply memory is missing • 10.1001 = cyan supply memory is missing • 10.1002 = magenta supply memory is missing • 10.1003 = yellow supply memory is missing
  • Remedy: Check the e-label. If it is broken or damaged, replace the cartridge. Verify that the cartridge is installed in the correct location. Remove and reinstall the cartridge and then power-cycle the product. If the error is with a color cartridge, try swapping it with a different color cartridge in the tray. If the same message appears, then there is an engine problem. If a different 10.10.XX message appears, replace the cartridge.
  • Code: 10.9531
  • Display: 10.9531 Error
  • Description: The toner collection unit is full or missing.
  • Remedy: Replace the toner collection unit.
  • Code: 10.XXXX
  • Display: 10.XXXX Supply error
  • Description: The supply memory for one of the print cartridges cannot be read or is missing. • 10.0000 = black supply memory error • 10.0001 = cyan supply memory error • 10.0002 = magenta supply memory error • 10.0003 = yellow supply memory error
  • Remedy: Reinstall the print cartridge. Turn the product off and then on. If the problem is not solved, replace the cartridge.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us