PrintCopy.info service

HP Color LaserJet CM4540 MFP

Error Codes List page 1

  • Code: 10.0X.90
  • Display: 10.0X.90 Replace <Supply>
  • Description: The product displays this error when there is a toner replenishment malfunction for a specific print cartridge.
  • Remedy: 1. Open the front door. 2. Remove the old print cartridge. 3. Remove the orange cover and install the new cartridge. CAUTION: Do not touch the shiny green drum. 4. Close the front door.
  • Code: 10.0X.Y0
  • Display: 10.0X.Y0 Supply memory error.
  • Description: The product is unable to read the print cartridge data. The print cartridge is present but defective. When this error occurs, a question mark appears on the gas gauge of the supply or supplies with the error. If multiple supplies have this error, a 10.0X.Y0 error for the first supply detected with the error will be shown. After the user resolves the error that corresponds to the first supply, another 10.0X.Y0 error displays for the next supply. This continues for all supplies memory errors.
    Memory error • 10.00.00 (event code): Black print cartridge • 10.01.00 (event code): Cyan print cartridge • 10.02.00 (event code): Magenta print cartridge • 10.03.00 (event code): Yellow print cartridge
    E-label missing • 10.00.10 (event code): Black print cartridge • 10.01.10 (event code): Cyan print cartridge • 10.02.10 (event code): Magenta print cartridge • 10.03.10 (event code): Yellow print cartridge
  • Remedy: 1. Open the front door and remove the print cartridge, and then reinsert it. 2. Close the front door. If the message reappears, turn the product off and then on. 3. If the error persists, replace the print cartridge.
  • Code: 10.XX.69
  • Display: 10.XX.69 <Supply> very low
  • Description: The product indicates when a supply level is very low. Actual print cartridge life might vary. Consider having a replacement print cartridge available to install when print quality is no longer acceptable. You do not need to replace the print cartridge at this time unless the print quality is no longer acceptable.
    • 10.00.69 (event code): Black print cartridge very low • 10.01.69 (event code): Cyan print cartridge very low • 10.02.69 (event code): Magenta print cartridge very low • 10.03.690 (event code): Yellow print cartridge very low
  • Remedy: If print quality is no longer acceptable, replace the print cartridge.
  • Code: 10.YY.60
  • Display: 10.YY.60 <color> cartridge low
  • Description: The product indicates when a supply level is low• Actual print cartridge life might vary. You do not need to replace the print cartridge at this time unless print quality is no longer acceptable. • 10.00.60 (event code): Black print cartridge • 10.01.60 (event code): Cyan print cartridge • 10.02.60 (event code): Magenta print cartridge • 10.03.60 (event code): Yellow print cartridge
  • Remedy: If print quality is no longer acceptable, replace the print cartridge. Consider purchasing a replacement cartridge so it is available when the installed cartridge has reached the end of its estimated life.
  • Code: 11.00.YY
  • Display: 11.00.YY Internal clock error
  • Description: The product real-time clock has experienced an error.
    • XX = 01: Clock battery failed • XX = 02: Real-time clock failed
  • Remedy: Whenever the product is turned off and then turned on again, set the time and date at the control panel. See the user guide for more information.
  • Code: 13.WX.EE
  • Display: 13.WX.EE Door open jam
  • Description: This error occurs when a door is opened during printing.
    • 13.AA.EE: Lower right door • 13.BA.EE: Right door • 13.EA.EE: Scanner cover NOTE: This jam can occur if the scanner cover is not securely latched. The sensor is located on the front of the IPTU, and the flag is located on the bottom of the scanner. • 13.8A.EE: Stapler/stacker • 13.FF.EE: Multiple doors?
  • Remedy: Clear the jam and firmly close the door when finished.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us