Description: The device has experienced an internal hardware error.
DC controller Memory Error
Remedy: Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Replace the DC controller
Code: 57
Display: 57 Fan Error Turn off then on
Description: The device has experienced a problem with its internal fan.
Remedy: Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. If the error persists, replace the fan. If the error still persists, replace the DC controller.
Code: 59.16
Display: 59.16
Description: The device has experienced an internal hardware error.
Main Motor rotation error
Remedy: Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Check the cable connections to the DC controller. If the error persists, replace the DC controller. If the error still persists, replace the main motor.
Code: 59.192
Display: 59.192
Description: The device has experienced an internal hardware error.
Developer Motor rotation error
Remedy: Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Check the cable connections to the DC controller. If the error persists, replace the DC controller. If the error still persists, replace the developer motor.
Code: 59.4
Display: 59.4
Description: The device has experienced an internal hardware error.
Fuser motor error
Remedy: Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Verify that the fuser is seated completely. If the error persists, replace the fuser motor. If the error still persists, replace the DC controller
Code: 59.99
Display: 59.99
Description: The device has experienced an internal hardware error.
T2 Clutch error
Remedy: Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
Check the cable connections to the DC controller. If the error persists, remove the imaging drum and check the clutch. If the error persists, replace the T2 clutch. If the error still persists, replace the DC controller