Description: PF ENCODER ASSY check error
The PF ENCODER ASSY signals have a defect.
Remedy: Check whether the PF ENCODER ASSY is properly connected. Check whether the PF MOTOR is properly connected. Replace the PF MOTOR .
Code: 1225
Description: PF MOTOR in position time-out error
The PF MOTOR cannot be driven normally.
Remedy: Replace the PF MOTOR .
Code: 1227
Description: PF MOTOR step-out error
The PF MOTOR is out of step.
Remedy: Replace the PF MOTOR .
Code: 1228
Description: PF servo parameter error
The PF MOTOR is overloaded abnormally.
Remedy: Check whether any foreign matter is obstructing the PF motor operation. If any obstruction is found, remove it. Replace the PF MOTOR .
Code: 131B
Description: Head driver (transmission gate) overheat error
The temperature of the head driver rises, and reaches the specified level.
Remedy: If the PRINT HEAD is operating without ink charged in it, carry out the ink charge sequence. Check whether the Head FFC is properly connected. If not (slant connection or the like), correct it. Replace the PRINT HEAD(s) .
Code: 1700
Description: Print position error
The correct print position cannot be detected.
Remedy: Clean the CR ENC SCALE and CR ENCODER ASSY. Replace the CR ENC SCALE . Replace the CR ENC ASSY . Install the latest firmware.