Description: CR origin sensor malfunction
CR home position sensor malfunction
Remedy: • Make sure the CR HP sensor is not twisted or bent • Replace the CR HP sensor • Replace the Main Board
Code: 0001000B
Description: PF origin sensor malfunction
PF home position sensor malfunction means motor replacement
Remedy: • Check the PF motor and sensor connections • Replace the PF motor (internal sensor) • Replace the Main Board
Code: 0001000C
Description: PG origin sensor malfunction
(may indicate PG motor malfunction)
Remedy: Make sure there is no ink or dust on the surface of the sensor. If this does not solve the problem, check the PG sensor connection. If there still is a problem, try the following. • Replace the PG sensor • Replace the PG motor • Replace the Main Board
Code: 0001000D
Description: Cover sensor malfunction (00)
Right sensor (HP side) One or both cover open sensors (interlock switch) located at either end of the cover shaft is malfunctioning.
Remedy: Make sure the sensor(s) are properly installed. If that does not solve the problem, check the cover open sensor connection. If there still is a problem, try the following. • Replace the malfunctioning cover sensor • Replace the Main Board
Code: 0001000E
Description: Cover sensor malfunction (01)
Left sensor. One or both cover open sensors (interlock switch) located at either end of the cover shaft is malfunctioning.
Remedy: Make sure the sensor(s) are properly installed. If that does not solve the problem, check the cover open sensor connection. If there still is a problem, try the following. • Replace the malfunctioning cover sensor • Replace the Main Board
Code: 0001000F
Description: CR motor PWM output error
Remedy: • Check the cutter housing, slightly loosen screws if necessary • Replace the Main Board.