Display: A printer error has occurred. Turn off the printer, then press On button to turn on. See your documentation.
Description: Fatal error (System)
Causes: RAM trouble occurs. System trouble occurs.
Remedy: 1. Connect the Scanner Motor cable to CN10 on the Main Board. 2. Replace the Scanner Motor with a new one.
Code: 02
Display: A printer error has occurred. Turn off the printer, then press On button to turn on. See your documentation.
Description: Fatal error (printer mechanism)
Causes: Mechanical trouble occurs.
Remedy: 1. Connect the Scanner Motor cable to CN10 on the Main Board. 2. Replace the Scanner Motor with a new one.
Code: 03
Display: A scanner error has occurred. See your documentation.
Description: Fatal error (Scanner)
Causes: Scanner error occurs.
Remedy: 1. Connect the Scanner Motor cable to CN10 on the Main Board. 2. Replace the Scanner Motor with a new one.
Code: 04
Display: Waste ink pad in the printer is saturated. Contact your dealer to replace it.
Description: Maintenance request (waste ink over flow)
Causes: The waste ink counter exceeds to capacity.
Remedy: 1. Change the Waste Ink Pads and initialize the Waste Ink Pad Counter.
Code: 05
Display: Paper jam. Open the scanner unit and remove the paper. Press the Start button to eject the paper inside. See your documentation.
Description: Paper jam error
Causes: Paper stays in the paper path after paper ejection.
Remedy: 1. Install the ASF Unit properly. 2. Set the Extension Spring 6.45 between the ASF Frame and the Paper Back Lever. 1. Set the Extension Spring Retard between the Retard Roller Unit and the ASF Frame.
Code: 06
Display: Press the OK button to replace ink cartridges.
Description: Ink end error
Causes: Ink is out in some I/C.
Remedy: 1. Install the Ink Cartridge properly. 2. Replace the Ink Cartridge with a new one. 1. Connect the Head FFC to connector on the CSIC Board. 2. Replace the CSIC Board with a new one. 1. Replace the CSIC Board with a new one.