PrintCopy.info service

Epson SC-P9000

Error Codes List page 1

  • Code: 0001
  • Description: NMI error
  • Causes: Firmware failure
    Main Board failure
  • Remedy: Install the correct firmware.
    Replace the Main Board Assy
  • Code: 0002
  • Description: System error
  • Causes: Firmware failure
    MAIN BOARD failure
  • Remedy: Install the correct firmware.
    Replace the Main Board Assy.
  • Code: 1101
  • Description: CR life error
  • Causes: The number of Carriage movement cycles reached the specified upper limit. (Ink tube’s life)
  • Remedy: Replace the ink tube (L & R), and clear the counter using the Service Program. In addition, check the statuses of the CR Motor, the driven pulley, the Carriage Unit, and the Head FFC, if any abnormal noise or wear is found, replace the corresponding part(s) along with the ink tube.
  • Code: 1125
  • Description: CR HP detection error
  • Causes: The home position of the carriage unit is not detected.
  • Remedy: Check the connection of the CR HP Sensor.
    Replace the CR HP Sensor.
    Check if the carriage lock is operating.
  • Code: 1138
  • Description: Over current error
  • Causes: The electric current flowing when driving the motor is irregularly large. (To protect the motor driver)
    • Encoder cable is damaged.
    • Motor cable is damaged.
    • Irregular load
    • Encoder failure
    • Motor failure
  • Remedy: Check the connection between the CR Encoder and the Main Board Assy.
    Check the connection between the CR Motor and the Main Board Assy.
    Replace the CR Encoder Sensor.
    Replace the CR Motor.
  • Code: 1139
  • Description: Oscillation error
  • Causes: Detects that the motor is still driven even though the firmware sends has commanded it to stop.
    • Motor driver failure
    • Motor failure
  • Remedy: Replace the Main Board Assy.
    Replace the CR Motor.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us