-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Epson SC-P6080
Error Codes List page 23
|
|
- Code: 2009
- Description: FLASH SUM CHECK ERROR
- Causes: Installation of the firmware has been failed. The Flash ROM is damaged.
- Remedy: Re-install the firmware.
Replace the Main Board Assy.
- Code: 200A
- Description: F/W load error
- Causes: Reading/decompressing the firmware has been failed.
- Remedy: Re-install the firmware.
Replace the Main Board Assy.
- Code: 200C
- Description: Servo interrupt watchdog time-out error
- Causes: Installation of the firmware has been failed. Main Board is damaged.
- Remedy: Install the correct firmware.
Replace the Main Board Assy.
- Code: 200D
- Description: System interrupt watchdog time-out error
- Causes: Firmware failure
Main Board failure
- Remedy: Replace the Main Board Assy.
- Code: 200E
- Description: Unknown NMI
- Causes: The CPU has detected an unknown NMI.
- Remedy: Replace the Main Board Assy.
- Code: 2030
- Description: Internal timeout error
- Causes:
- Remedy: Replace the Main Board Assy.