Epson SC-P608

• Code: 01H
• Description: DC motor error (CR)
  PID excess load error
• Causes: • CR Encoder failure
  • Motor driver failure
  • Increase of CR load when printer is printing (CR shaft is damaged, CR shaft receiver is damaged, Grease is consumed, DR layshaft is deformed)
  • Paper jam • CR is collided to Front Tray Assy
  • CR is collided to Upper Paper Guide Assy • CR Motor failure
• Remedy: • CR Encoder
  • CR FFC
  • Main Board
  • CR Shaft, CR Unit, Guide CR
  • CR grease
  • Remove Paper Jam
  • Front Tray Assy
  • Front Tray Sensor
  • APG Assy
  • Upper Paper Guide Assy
  • CR Motor

• Code: 03H
• Description: DC motor error (CR)
  PID reverse error
• Causes: • CR Scale stain
  • CR Encoder failure
  • Motor driver failure
  • CR Belt failure
  • CR Pully failure
• Remedy: • CR Scale
  • CR Encoder Assy
  • CR FFC
  • Main Board
  • CR Belt
  • CR Pully

• Code: 05H
• Description: DC motor error (CR)
  PID speed degradation error
• Causes: • CR Encoder failure
  • Motor driver
• Remedy: • CR Encoder
  • CR FFC
  • Main Board
  • CR Motor
  • Paper Jam

• Code: 30H
• Description: Command error
  EEPROM verify error (by command)
• Causes: EEPROM verify error (by command)
• Remedy:

• Code: 40H
• Description: Printhead system error
  Transistor temperature error
• Causes: • Main Board failure
• Remedy: • Main board

• Code: 41H
• Description: Printhead system error
  X-Hot detect error (pre printing)
• Causes: • Printhead failure
  • Main Board failure
• Remedy: • Print Head
  • Print Head FFC
  • Main Board