-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Epson SC-F7170
Error Codes List page 15
|
|
- Code: 1FBF
- Description: CSIC error
- Causes: CRCM Board communication error
• Broken FFC
• Slant connection
• Ink holder board failure
- Remedy: Is the FFC connected at an angle?
1. Connect the FCC again.
2. Replace the FFC.
3. Replace the Ink Holder.
- Code: 1FC0
- Description: CSIC error
- Causes: CSIC control error
- Remedy: 1. Replace the Ink Holder.
2. Replace the Main Board.
- Code: 1FC1
- Description: CSIC error
- Causes: CSIC control error
- Remedy: 1. Replace the Ink Holder.
2. Replace the Main Board.
- Code: 2000
- Description: NVRAM error
- Causes: NVRAM erase or write error has occurred.
- Remedy: Replace the Main Board.
- Code: 2002
- Description: SDRAM error
- Causes: Writing to the SDRAM was attempted, but nothing could be written to it.
- Remedy: Replace the Main Board.
- Code: 2003
- Description: FLASH BOOT checksum error
- Causes: • Installing the firmware has failed.
• The Flash ROM is out of order.
- Remedy: 1. Re-install the firmware.
2. Replace the Main Board.