Canon iR Advance C7565i

Error Codes List page 3

Error Code:

page

Code: 004-0202-05
Description: Protection circuit error
Causes: An error in temperature difference between the Fixing Film Unit Main Thermistor and the Fixing Film Unit Sub Thermistor 1 was detected.
Remedy: [Related parts] R1.00 - Harnesses connecting the Pickup Driver PCB (UN4/J1491), the Drawer Unit (J8001) and the Fixing Thermistor Unit 1/2 (THM11/J7404 and THM13/J8003) - Harness between the Relay PCB (UN7/J1816) and the Fixing Motor (M48/J7612) - Fixing Film Unit - Fixing Motor (M48) - Pickup Driver PCB (UN4) - Relay PCB (UN7) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 004-0203-05
Description: Protection circuit error
Causes: An error in temperature difference between the Fixing Film Unit Main Thermistor and the Fixing Film Unit Sub Thermistor 2 was detected.
Remedy: [Related parts] R1.00 - Harnesses connecting the Pickup Driver PCB (UN4/J1491), the Drawer Unit (J8001) and the Fixing Thermistor Unit 1/2 (THM11/J7404 and THM13/J8003) - Harness between the Relay PCB (UN7/J1816) and the Fixing Motor (M48/J7612) - Fixing Film Unit - Fixing Motor (M48) - Pickup Driver PCB (UN4) - Relay PCB (UN7) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 004-0214-05
Description: Protection circuit error
Causes: It was detected that temperature difference between the Fixing Film Unit Thermistor (Front) and the Fixing Film Unit Thermistor (Rear) was 50 deg C or more.
Remedy: [Related parts] R1.00 - Harnesses connecting the Pickup Driver PCB (UN4/J1491), the Drawer Unit (J8001) and the Fixing Thermistor Unit 1/2 (THM11/J7404 and THM13/J8003) - Harness between the Relay PCB (UN7/J1816) and the Fixing Motor (M48/J7612) - Fixing Film Unit - Fixing Motor (M48) - Pickup Driver PCB (UN4) - Relay PCB (UN7) [Remedy] Check/replace the related harness/cable, connector and parts. After performing the remedy work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR.

Code: 004-0215-05
Description: Protection circuit error
Causes: It was detected that temperatures of the Fixing Film Unit Thermistor (Front) and the Fixing Film Unit Thermistor (Rear) have changed by 20 deg C or more while operating the Fixing Film.
Remedy: [Related parts] R1.00 - Harnesses connecting the Pickup Driver PCB (UN4/J1491), the Drawer Unit (J8001) and the Fixing Thermistor Unit 1/2 (THM11/J7404 and THM13/J8003) - Harness between the Relay PCB (UN7/J1816) and the Fixing Motor (M48/J7612) - Fixing Film Unit - Fixing Motor (M48) - Pickup Driver PCB (UN4) - Relay PCB (UN7) [Remedy] Check/replace the related harness/cable, connector and parts. After performing the remedy work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR.

Code: 004-0301-05
Description: Protection circuit error
Causes: An error in current of the IH Power Supply PCB was detected. (ASIC detection)
Remedy: [Related parts] R1.00 - Harness between the Pickup Driver PCB (UN4/J1489) and the IH Power Supply PCB (UN30/ J501) - Harnesses connecting the IH Power Supply PCB (UN30/J510), the Drawer Unit (J8027) and the Main Heater (H4) - Fixing Film Unit - Main Heater (H4) - IH Power Supply PCB (UN30) - Pickup Driver PCB (UN4) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 004-0302-05
Description: Protection circuit error
Causes: An error in current of the IH Power Supply PCB was detected. (Software detection)
Remedy: [Related parts] R1.00 - Harness between the Pickup Driver PCB (UN4/J1489) and the IH Power Supply PCB (UN30/ J501) - Harnesses connecting the IH Power Supply PCB (UN30/J510), the Drawer Unit (J8027) and the Main Heater (H4) - Fixing Film Unit - Main Heater (H4) - IH Power Supply PCB (UN30) - Pickup Driver PCB (UN4) [Remedy] Check/replace the related harness/cable, connector and parts.

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home