Remedy: 1. After the power of the Host Machine has been turned ON, rotation of the Fixing Heat Exhaust Fan 1 (FM1) was detected before turning ON the fan. 2. There is no rotation signal while the Fixing Heat Exhaust Fan 1 (FM1) is rotating.
Code: E806-0000
Description: Error in Delivery fan 1
1. Failure in the Connect signal when the fan was turned OFF. 2. Failure detected while the fan is rotating.
Remedy: 1. Check the fan harness (to see if the harness is caught, disconnected or physically removed). 2. Replace the Pickup Feed Driver PCB (UN2). 3. Replace the Delivery Fan (FM7).
Code: E806-0001
Description: Error in Delivery fan 2
1. After the power of the Host Machine has been turned ON, rotation of the fan was detected before turning ON the fan. 2. There is no rotation signal while the fan is rotating.
Remedy: 1. Check the fan harness (to see if the harness is caught, disconnected or physically removed). 2. Replace the Pickup Feed Driver PCB (UN2). 3. Replace the Delivery Fan 2 (FM9).
Code: E806-0002
Description: Error in Secondary Transfer Exhaust Fan
1. After the power of the Host Machine has been turned ON, rotation of the fan was detected before turning ON the fan. 2. There is no rotation signal while the fan is rotating.
Remedy: 1. Check the fan harness (to see if the harness is caught, disconnected or physically removed). 2. Replace the Pickup Feed Driver PCB (UN2). 3. Replace the Secondary Transfer Exhaust Fan (FM8).
Code: E807-0000
Description: Error in Process cartridge fan (rear)
1. After the power of the Host Machine has been turned ON, rotation of the fan was detected before turning ON the fan. 2. There is no rotation signal while the fan is rotating.
Remedy: 1. Check the fan harness (to see if the harness is caught, disconnected or physically removed). 2. Replace the Relay Board. 3. Replace the fan.
Code: E807-0001
Description: Error in Process cartridge fan (front)
1. After the power of the Host Machine has been turned ON, rotation of the fan was detected before turning ON the fan. 2. There is no rotation signal while the fan is rotating.
Remedy: 1. Check the fan harness (to see if the harness is caught, disconnected or physically removed). 2. Replace the Pickup Feed Driver PCB (UN2). 3. Replace the fan.