Causes: Processing to clear image data in the memory was not completed normally within the specified period of time.
Remedy: Perform the following in the order while checking whether the error is cleared. 1. Reinstall the latest system software using SST or a USB flash drive. 2. Check/replace the Main Controller PCB.
Code: E315-0500-00
Description: Image process device timeout error
Causes: Transfer of image signal was not completed within the specified period of time at scanning.
Remedy: [Related parts] R1.00 - Harness between the Reader Unit and Main Controller PCB - Main Controller PCB [Remedy] Perform the following in the order while checking whether the error is cleared. 1. Reinstall the latest system software using SST or a USB flash drive. 2. Check/replace the related harness/cable, connector and parts.
Code: E315-0510-00
Description: Image process device timeout error
Causes: Image processing was not completed within the specified period of time at scanning.
Remedy: [Related parts] R1.00 - Harness between the Reader Unit and Main Controller PCB - Main Controller PCB - Reader Controller PCB [Remedy] Perform the following in the order while checking whether the error is cleared. 1. Reinstall the latest system software using SST or a USB flash drive. 2. Check/replace the related harness/cable, connector and parts.
Code: E315-0530-00
Description: Image process device error
Causes: Compression processing of the scanned image into JPEG was terminated abnormally.
Remedy: Perform the following in the order while checking whether the error is cleared. 1. Reinstall the latest system software using SST or a USB flash drive. 2. Check/replace the Main Controller PCB.
Code: E315-0531-00
Description: Image process device timeout error
Causes: Compression processing of the scanned image into JPEG was not completed within the specified period of time.
Remedy: [Related parts] R1.00 - Harness between the Reader Unit and Main Controller PCB - Main Controller PCB - Reader Controller PCB [Remedy] Perform the following in the order while checking whether the error is cleared. 1. Reinstall the latest system software using SST or a USB flash drive. 2. Check/replace the related harness/cable, connector and parts.
Code: E315-0540-00
Description: Image process device error
Causes: An error occurred during decompression of JPEG.
Remedy: Perform the following in the order while checking whether the error is cleared. 1. Reinstall the latest system software using SST or a USB flash drive. 2. Check/replace the Main Controller PCB.