Display: Problem with Printhead L Chk printing results
Description: Printhead L non-ejection warning (doublehead model) (Check printout/ possible to continue printing) See 280C for detection criteria.
Remedy: 1. Check image quality. (Unless there are problems with the image quality, there is no need to replace the printhead.) 2. Replace the printhead.
Code: 1015
Display: This type of paper is not compatible with HP-GL/2.
Description: HP-GL2 error: out of the scope of paper support [Warning Indication] or [Pause] have been selected for [Paper Mismatch Detection]. The paper that is being fed does not support HP-GL/2 printing; that is, a paper type that does not have a required print mode has been set.
Remedy: When [Warning Indication] is selected Replace with appropriate paper. When [Pause] is selected 1. Press the [Online] button to force printing. Caution) Due to use of image process table (LUT) defined for HP-GL/2 compatible paper different from the specified paper, you might have a problem in quality of image. 2. Press the [Stop] button to cancel printing.
Code: 1021
Display: Papr Type Mismatch
Description: Paper mismatch (type) With [Warning Indication] is selected for [Paper Mismatch Detection], the type of loaded paper mismatches the specified type. Or, with [Pause] is selected for [Paper Mismatch Detection], the [Online] button was pressed to execute forced printing.
Remedy: Continued printing is allowed. Check driver setting. Replace with appropriate paper.
Code: 1022
Display: Papr Type Mismatch
Description: Paper mismatch (type) With [Warning Indication] is selected for [Paper Mismatch Detection], the type of loaded paper mismatches the specified type. Or, with [Pause] is selected for [Paper Mismatch Detection], the [Online] button was pressed to execute forced printing.
Remedy: Continued printing is allowed. Check driver setting. Replace with appropriate paper.
Code: 1030
Display: GARO W1221
Description: (Image mode)Unknown command A character that is located within bounds of a group character or end parameter character but that is not defined as a command has been detected during Image mode command decoding.
Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).
Code: 1031
Display: GARO W1222
Description: (Image mode) Invalid parameter count (no parameters) A numeric field has not been identified as being numeric during Image mode command decoding.
Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).