PrintCopy.info service

Canon D520

Error Codes List page 2

  • Code: E202-0002
  • Description: Contact Sensor HP error, Failure in return
  • Remedy: When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies.
    (1) Check the connection of Flat Cable between Main Controller Board (J5) and Contact Sensor.
    (2) Replace the Flat Cable between Main Controller Board (J5) and Contact Sensor.
    (3) Replace the Contact Sensor.
    (4) Replace the Main Controller Board.
  • Code: E225-0001
  • Description: Light intensity of a lamp is less or equal to the criteria
  • Remedy: When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies.
    (1) Check the connection of Flat Cable between Main Controller Board (J5) and Contact Sensor.
    (2) Replace the Flat Cable between Main Controller Board (J5) and Contact Sensor.
    (3) Replace the Contact Sensor. (4) Replace the Main Controller Board.
  • Code: E301-0001
  • Description: Insufficient light intensity in shading
  • Remedy: When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies.
    (1) Check the connection of Flat Cable between Main Controller Board (J5) and Contact Sensor.
    (2) Replace the Flat Cable between Main Controller Board (J5) and Contact Sensor.
    (3) Replace the Contact Sensor.
    (4) Replace the Main Controller Board.
  • Code: E736-0000
  • Description: Communication error with CCU/modem, or no FAX board installed on FAX model
  • Remedy: When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies.
    (1) Check the connection of connectors between the Main Controller Board (J601, J602) and the FAXNCU Board (J1201, J1204).
    (2) Replace the connectors between the Main Controller Board (J601, J602) and the FAX-NCU Board (J1201, J1204).
    (3) Replace the FAX-NCU Board.
    (4) Replace the Main Controller Board.
  • Code: E740-0002
  • Description: Error detection on either Network Board or Mac address
  • Remedy: When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies.
    (1) Check the connection of the network cable.
    (2) Replace the Main Controller Board.
  • Code: E744-0002
  • Description: Language file error
  • Remedy: When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. Update the set of the Controller Firmware
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us