PrintCopy.info service

Canon D1320

Error Codes List page 10

  • Code: E766-8000
  • Description: Digital registration error
    Information at digital registration could not be obtained.
  • Remedy: 1. Install the Engine Controller firmware. 2. Install the set of the controller firmware. 3. Replace the Engine Controller PCB.
  • Code: E766-9000
  • Description: Scanner power state error
    An error was detected in power state of the Laser Scanner Unit.
  • Remedy:
  • Code: E766-xxxx
  • Description: Firmware error
    An error due to the controller software occurred so that print could not be proceeded.
  • Remedy: Due to firmware error, the possibility of solving the error by replacing the Main Controller PCB is low. Check the installed engine again.
  • Code: E804-0004
  • Description: Controller Fan error
    Since the startup of the Controller Fan, the Fan was locked for a specified consecutive period of time.
  • Remedy: 1. Check power supply to the Controller Fan. 2. Replace the Controller Fan.
  • Code: E805-0000
  • Description: Main Fan error
    The Main Fan was locked for a specified consecutive period of time.
  • Remedy: 1. Check the connection of the Main Fan. 2. Replace the Main Fan.
  • Code: E808-0000
  • Description: Failure detection of Low Voltage Power Supply PCB
    Printer detected failure of the Low Voltage Power Supply PCB.
  • Remedy: Replace the Engine Controller PCB.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us