Description: Abnormal high temperature of Fixing Assembly
Causes: It was detected that the temperature of the Fixing Assembly (Main Thermistor) was abnormally high.
Remedy: 1. Check the harness/connector between the Fixing Assembly and the Engine Controller PCB (UN1). 2. Replace the Fixing Assembly. 3. Replace the Low Voltage Power Supply PCB (UN2). 4. Replace the Engine Controller PCB (UN1).
Code: E003-0000
Description: Abnormal low temperature of Fixing Assembly
Causes: It was detected that the temperature of the Fixing Assembly (Main Thermistor) was abnormally low.
Remedy: 1. Check the harness/connector between the Fixing Assembly and the Engine Controller PCB (UN1). 2. Replace the Fixing Assembly. 3. Replace the Low Voltage Power Supply PCB (UN2). 4. Replace the Engine Controller PCB (UN1).
Code: E004-0000
Description: Error in fixing power supply drive circuit
Causes: The zero cross signal was not detected for the specified period of time or longer.
Remedy: 1. Check the harness/connector between the Engine Controller PCB (UN1) and the Main Thermistor (TH802). 2. Check the harness/connector between the Fixing Assembly and the Engine Controller PCB (UN1). 3. Replace the Fixing Assembly. 4. Replace the Low Voltage Power Supply PCB (UN2). 5. Replace the Engine Controller PCB (UN1).
Code: E012-0000
Description: Error in startup of Main Motor
Causes: The revolution of the Fixing Motor did not reach the specified value.
Remedy: 1. Check the harness/connector between the Main Motor (M701) and the Low Voltage Power Supply PCB (UN2). 2. Check the harness/connector between the Low Voltage Power Supply PCB (UN2) and the Engine Controller PCB (UN1). 3. Replace the Main Motor (M701). 4. Replace the Low Voltage Power Supply PCB (UN2). 5. Replace the Engine Controller PCB (UN1).
Code: E012-0001
Description: Main Motor rotation error
Causes: The revolution of the Main Motor was out of the specified range.
Remedy: 1. Check the harness/connector between the Main Motor (M701) and the Low Voltage Power Supply PCB (UN2). 2. Check the harness/connector between the Low Voltage Power Supply PCB (UN2) and the Engine Controller PCB (UN1). 3. Replace the Main Motor (M701). 4. Replace the Low Voltage Power Supply PCB (UN2). 5. Replace the Engine Controller PCB (UN1).
Code: E015-0000
Description: Main Motor error
Causes: An error was detected in the Main Motor.
Remedy: 1. Check the harness/connector between the Main Motor (M701) and the Low Voltage Power Supply PCB (UN2). 2. Check the harness/connector between the Low Voltage Power Supply PCB (UN2) and the Engine Controller PCB (UN1). 3. Replace the Main Motor (M701). 4. Replace the Low Voltage Power Supply PCB (UN2). 5. Replace the Engine Controller PCB (UN1).