Description: The thermistor (TH1, TH2) has detected an open circuit.
Causes: The fixing heater is faulty. The SSR is faulty. The fixing thermistor is faulty. The thermistor (TH1, TH2) has an open circuit. The thermal switch (TP1) has turned on.
Code: E004-01
Description: Main heater (H1)
SSR1 for the fixing heater is ON even though the fixing heater (H1, H2) is OFF.
Causes: The SSR1 is faulty.
Code: E004-02
Description: Sub heater (H2)
SSR1 for the fixing heater is ON even though the fixing heater (H1, H2) is OFF.
Causes: The SSR1 is faulty.
Code: E005
Description: The web solenoid (SL4) has turned on 300 times after the fixing web length sensor (S24) stopped detecting the flag.
Causes: The fixing web has run out. The fixing web length sensor (S24) is faulty.
Code: E006-0001
Description: The fixing drawer cannot be detected even though the 24-V door is closed
Causes: The fixing drawer has poor contact. The fixing assembly is absent.
Code: E010-0001
Description: The pickup main motor (M2) is released. The motor is checked every 10 msec from 3000 msec after it is started to when it is stopped. However, detection is not made when the front cover/delivery assembly cover/face-down delivery unit is released or when there is a fault in the power supply system.
Causes: The main motor drive system has an excess load. The pickup main motor (M2)/delivery main motor (M16)/pedestal main motor (M19) is faulty. The serial driver PCB is faulty. The DC controller PCB is faulty.