Description: Wired LAN MAC address not registered.
Causes: MAC address not registered correctly
Remedy: The paper tray cannot feed paper Replace the paper tray. Registration sensor actuator unhooked Set the registration sensor actuator into place. Main PCB defective Replace the main PCB. Clutch gear not switched between the idle gear L and purge gear Check the engagement of the clutch gear and clean it.
Code: E4
Description: Out of recording paper. (Not used.)
Causes:
Remedy: The paper tray cannot feed paper Replace the paper tray. Registration sensor actuator unhooked Set the registration sensor actuator into place. Main PCB defective Replace the main PCB. Clutch gear not switched between the idle gear L and purge gear Check the engagement of the clutch gear and clean it
Code: E6
Description: Write error in EEPROM.
Causes: Main PCB defective
Remedy: Replace the main PCB.
Code: E8
Description: Data scanning error during transmission.
Causes:
Remedy: CIS defective Replace the scanner cover (scanner unit). Main PCB defective Replace the main PCB.
Code: EA
Description: Document removed at phase B
Causes:
Remedy: Document front sensor actuator caught on the surrounding parts Correct the surrounding parts on which the actuator caught. Document front sensor defective Replace the document front sensor. Main PCB defective Replace the main PCB.