PrintCopy.info service

Brother MFC-T4500DW

Error Codes List page 1

  • Code: 0D00
  • Description: Paper jam during duplex-printing
    - The recording papers are fed in reverse on the platen when switchback drive is started, triggering switchback sensor as paper feeding condition.
  • Remedy: < User Check >
    - Remove the jammed paper.
    - Check whether the recording paper being used is within the specification.
    - Check that recording paper are not curled, wrinkled or wet.
    - Check that recording paper is loaded correctly in the tray.
    - Check that Output paper tray is set correctly (not inserted halfway).
    1 Foreign materials in the duplex print paper path Remove foreign materials.
    2 Switchback outer paper guide not mounted in place Set the switchback outer paper guide into place.
    3 Switchback actuator caught on the surrounding parts Set the switchback frame ASSY into place.
    4 Switchback sensor defective Replace the switchback sensor PCB.
    5 Main PCB defective Replace the main PCB.
  • Code: 0E00
  • Description: Defective during duplex-printing
    - Switchback sensor detects paper feed condition at out of specified timing during switchback.
  • Remedy: < User Check >
    - Check whether the recording paper being used is within the specification.
    - Check that Output paper tray is set correctly (not inserted halfway).
    1 Switchback actuator caught on the surrounding parts Set the switchback frame ASSY into place.
    2 Switchback sensor defective Replace the switchback sensor PCB.
    3 Main PCB defective Replace the main PCB.
  • Code: 1300
  • Description: Defective during duplex-printing
    - Registration sensor detects paper feed condition at out of specified timing during switchback.
  • Remedy: < User Check >
    - Check that recording paper is not loaded in the MP tray and/or manual feed slot.
    - Check whether the recording paper being used is within the specification.
    - Check that Output paper tray is set correctly (not inserted halfway).
    1 Registration actuator caught on the surrounding parts Set the registration actuator into place.
    2 Switchback actuator caught on the surrounding parts Set the switchback frame ASSY into place.
    3 Registration sensor defective Replace the registration sensor PCB.
    4 Main PCB defective Replace the main PCB.
  • Code: 1500
  • Description: Paper jam during duplex ejecting
    - Recording paper is not able to be ejected since it is longer than 840 mm when ejecting the paper. (The registration sensor stays in the paper feeding condition during ejecting.)
  • Remedy: < User Check >
    - Remove the jammed paper.
    - Check whether the recording paper being used is within the specification.
    1 Foreign materials in the recording paper path Remove foreign materials.
    2 Registration actuator caught on the surrounding parts Set the registration actuator into place.
    3 Main PCB defective Replace the main PCB.
  • Code: 1700
  • Description: Recording paper size error (duplex-printing/duplex-copying)
    - Paper width is narrower than 95.5 mm (detection by paper width sensor)
    - Paper length is longer than 461.8 mm (detection by registration sensor)
    - Paper length is shorter than 143.5 mm (detection by registration sensor)
  • Remedy: < User Check >
    - Check whether the recording paper being used is within the specification.
    - Check that dark recording paper is not used.
    1 CR encoder strip stained Clean the CR encoder strip.
    2 PF encoder disk stained Clean the PF encoder disk and flushing guide. (refer to "Precautions for Troubleshooting and/ or Disassembly/Assembly")
    3 Registration actuator caught on the surrounding parts Set the registration actuator into place.
    4 Switchback actuator caught on the surrounding parts Set the switchback frame ASSY into place.
    5 CR encoder strip defective Replace the CR encoder strip.
    6 PF encoder disk defective Replace the PF encoder disk.
    7 Registration sensor defective Replace the registration sensor PCB.
    8 Paper width sensor defective Replace the carriage PCB ASSY.
    9 Paper feed motor defective Replace the paper feed motor.
    10 Main PCB defective Replace the main PCB.
  • Code: 1800
  • Description: Paper jam during duplex-printing
    - Registration sensor does not detect paper feed within specified pulse numbers in the second side paper re-feed.
  • Remedy: < User Check >
    - Remove the jammed paper.
    - Check whether the recording paper being used is within the specification.
    - Check that recording paper are not curled, wrinkled or wet.
    - Check that Output paper tray is set correctly (not inserted halfway).
    1 Foreign materials in the duplex print paper path Remove foreign materials.
    2 Registration actuator caught on the surrounding parts Set the registration actuator into place.
    3 Switchback actuator caught on the surrounding parts Set the switchback frame ASSY into place.
    4 Registration sensor defective Replace the registration sensor PCB.
    5 Switchback roller defective Replace the switchback roller.
    6 Drive frame ASSY defective Replace the maintenance unit.
    7 Main PCB defective Replace the main PCB.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us