PrintCopy.info service

Brother HL-L9200CDWT

Error Codes List page 1

  • Code: 0100
  • Display: Print Unable 01 Turn the power off and then back on again.
  • Description: ASIC error or motor driver error occurred.
  • Remedy: 1 Main PCB failure Replace the main PCB ASSY.
  • Code: 0201
  • Display: Print Unable 02 Turn the power off and then back on again.
  • Description: Synchronization signal from the main motor cannot be detected. Or the main motor speed is unstable after a set period of time.
  • Remedy: 1 Connection failure of the main motor harness Reconnect the main motor harness. 2 Connection failure of the low-voltage power supply PCB harness Reconnect the low-voltage power supply PCB harness. 3 Part in the process drive unit damaged Replace the process drive unit. 4 Fuser unit damaged Replace the fuser unit. 5 Low-voltage power supply PCB failure Replace the low-voltage power supply PCB unit. 6 Main PCB failure Replace the main PCB ASSY.
  • Code: 0202
  • Display: Print Unable 02 Turn the power off and then back on again.
  • Description: Synchronization signal from the process motor cannot be detected. Or the process motor speed is unstable after a set period of time.
  • Remedy: 1 Connection failure of the process motor harness Reconnect the process motor harness. 2 Connection failure of the low-voltage power supply PCB harness Reconnect the low-voltage power supply PCB harness. 3 Part in the process drive unit damaged Replace the process drive unit. 4 Low-voltage power supply PCB failure Replace the low-voltage power supply PCB unit. 5 Main PCB failure Replace the main PCB ASSY.
  • Code: 020F
  • Display: Print Unable 02 Turn the power off and then back on again.
  • Description: The main motor other than the official specifications is used.
  • Remedy: 1 Incorrect specifications of the main motor Replace the process drive unit with a correct one. 2 Main PCB failure Replace the main PCB ASSY.
  • Code: 0300
  • Display: Print Unable 03 Turn the power off and then back on again.
  • Description: The Lock signal of the polygon motor of the laser unit cannot be detected.
  • Remedy: 1 Connection failure of the polygon motor harness Reconnect the polygon motor harness. 2 Laser unit failure Replace the laser unit. 3 Main PCB failure Replace the main PCB ASSY.
  • Code: 0401
  • Display: Print Unable 04 Turn the power off and then back on again.
  • Description: BD sensor 1 damaged.
  • Remedy: 1 Connection failure of the polygon motor harness Reconnect the polygon motor harness. 2 Laser unit failure Replace the laser unit. 3 Main PCB failure Replace the main PCB ASSY.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us