PrintCopy.info service

Brother HL-L2340DW

Error Codes List page 4

  • Code: 0B01
  • Display: Print Unable 0B Turn the power off and then back on again.
  • Description: An error occurred in the high-voltage power supply PCB ASSY while operating.
  • Remedy: 1 Connection failure of the HVPS flat cable Reconnect the HVPS flat cable. 2 High-voltage power supply PCB failure Replace the high-voltage power supply PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.
  • Code: 0B02
  • Display: Print Unable 0B Turn the power off and then back on again.
  • Description: An error occurred in the high-voltage power supply PCB ASSY when the machine was in the ready state.
  • Remedy: 1 Connection failure of the HVPS flat cable Reconnect the HVPS flat cable. 2 High-voltage power supply PCB failure Replace the high-voltage power supply PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.
  • Code: 4000
  • Display: Drum End Soon
  • Description: The number of rotations of the drum unit is reaching the upper limit.
  • Remedy: <User Check> • Prepare a new drum unit.
    1 Replace the drum unit with a new one and reset the drum counter. If the error display is not cleared, the main PCB is faulty. Replace the main PCB ASSY.
  • Code: 4200
  • Display: Replace Drum
  • Description: The number of rotations of the drum unit has reached the upper limit. (Printing does not stop.)
  • Remedy: <User Check> • Prepare a new drum unit.
    1 Replace the drum unit with a new one and reset the drum counter. If the error display is not cleared, the main PCB is faulty. Replace the main PCB ASSY.
  • Code: 4B01
  • Display: Toner Low
  • Description: Dot count or develop roller counter of the toner is reaching the upper limit.
  • Remedy: <User Check> • Prepare a new toner cartridge.
    1 Main PCB failure Replace the main PCB ASSY.
  • Code: 4C01
  • Display: Replace Toner Open the Front Cover, replace Toner Cartridge.
  • Description: Dot count or develop roller counter of the toner has reached the upper limit in the toner stop mode.
  • Remedy: <User Check> • Replace the toner cartridge which has reached the upper limit.
    1 If the error display is not cleared after replacing the toner cartridge with a new one, the main PCB is faulty. Replace the main PCB ASSY.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us