PrintCopy.info service

Brother DCP9270CDN

Error Codes List page 1

  • Code: 0B
  • Description: Touch panel no response error.
  • Causes: 1 Harness connection failure of LCD unit. 2 LCD unit failure. 3 Main PCB failure.
  • Remedy: 1 Harness connection failure of LCD unit Check the harness connection of the LCD unit and reconnect it. 2 LCD unit failure Replace the touch panel ASSY. 3 Main PCB failure Replace the main PCB ASSY.
  • Code: 0E
  • Description: Touch panel failure upon start-up of the machine.
  • Causes: 1 Harness connection failure of LCD unit. 2 LCD unit failure. 3 Main PCB failure.
  • Remedy: 1 Harness connection failure of LCD unit Check the harness connection of the LCD unit and reconnect it. 2 LCD unit failure Replace the touch panel ASSY. 3 Main PCB failure Replace the main PCB ASSY.
  • Code: 0F
  • Description: The back cover is open upon duplex printing. (The back cover sensor is OFF.)
  • Causes: 1 Harness connection failure of back cover sensor. 2 Back cover damaged. 3 Back cover sensor failure. 4 Main PCB failure.
  • Remedy: 1 Harness connection failure of back cover sensor Check the harness connection of the back cover sensor ASSY and reconnect it. 2 Back cover damaged Replace the back cover. 3 Back cover sensor failure Replace the back cover sensor ASSY. 4 Main PCB failure Replace the main PCB ASSY.
  • Code: 10
  • Description: Inter-color position alignment adjustment failure. (Error, which cannot be recorded, occurs.)
  • Causes: 1 Main PCB failure
  • Remedy: Replace the main PCB ASSY.
  • Code: 11
  • Description: Inter-color position alignment adjustment failure. (Toner of the color which is being used reached the end of life.)
  • Causes: 1 Main PCB failure
  • Remedy: Replace the main PCB ASSY.
  • Code: 12
  • Description: Inter-color position alignment adjustment failure. (Incorrect measurement value of inter-color position alignment adjustment.)
  • Causes: 1 Foreign object is affixed around the density sensor. 2 Harness connection failure of registration mark sensor holder ASSY. 3 Registration mark sensor PCB failure. 4 High-voltage power supply PCB failure. 5 Engine PCB failure. 6 Low-voltage power supply PCB failure. 7 Main PCB failure
  • Remedy: 1 Foreign object is affixed around the density sensor Remove the foreign object affixed around the density sensor. 2 Harness connection failure of registration mark sensor holder ASSY Check the harness connection of the registration mark sensor holder ASSY and reconnect it. 3 Registration mark sensor PCB failure Replace the registration mark sensor holder ASSY. 4 High-voltage power supply PCB failure Replace the high-voltage power supply PCB ASSY. 5 Engine PCB failure Replace the engine PCB ASSY. 6 Low-voltage power supply PCB failure Replace the low-voltage power supply PCB ASSY. 7 Main PCB failure Replace the main PCB ASSY.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us