Brother DCP145C
Error Codes List page 10
|
|
- Code: E3
- Description: Wireless LAN MAC address not registered
- Causes: MAC address not registered correctly
- Remedy: Transfer MAC address from the WLAN PCB to the main PCB.
- Code: E4
- Description: No recording paper fed. (No paper detected by the registration sensor.)
- Causes:
- Remedy: Paper tray not set in place Set the paper tray correctly. Recording paper not loaded correctly No paper loaded in the paper tray. Reload paper. Load the correct size of paper. Jam clear cover not closed correctly Close the jam clear cover correctly. Registration sensor harness connection failure Reconnect the harness. Registration sensor defective Replace the registration sensor PCB. Main PCB defective Replace the main PCB.
- Code: E5
- Description: Write error in EEPROM on the cordless PCB.
- Causes:
- Remedy: The base ID code and cordless handset ID code registered are mismatched. Reregister the cordless handset ID code. Replace the cordless handset. Replace the cordless PCB.
- Code: E6
- Description: Write error in EEPROM.
- Causes:
- Remedy: Main PCB defective Replace the main PCB.
- Code: E7
- Description: No communication between cordless PCB and cordless handset.
- Causes: The base ID code and cordless handset ID code registered are mismatched.
- Remedy: Reregister the cordless handset ID code. Replace the cordless handset. Replace the cordless PCB.
- Code: EA
- Description: Document removed at phase B.*
- Causes:
- Remedy: Document front sensor actuator caught on the surrounding parts Correct the surrounding parts on which the actuator caught. Document front sensor defective Replace the document front sensor PCB. Main PCB defective Replace the main PCB.