-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Brother DCP-T310
Error Codes List page 19
|
|
- Code: E900
- Description: NFC PCB initialization failed.
- Causes:
- Remedy: 1 NFC PCB harness connection failure Reconnect the NFC PCB harness.
2 NFC PCB defective Replace the NFC PCB.
3 Panel PCB ASSY defective Replace the panel PCB ASSY.
4 Main PCB defective Replace the main PCB.
- Code: EC00
- Description: A USB device out of the specifications is inserted to the USB terminal, and consequently over current flows.
- Causes:
- Remedy: < User Check > - Remove the inserted USB device.
1 Main PCB defective Replace the main PCB.
- Code: F000
- Description: Flash file system error
- Causes:
- Remedy: < User Check > - Turn the power OFF and ON.
1 Program malfunctioning Re-load the firmware.
2 Main PCB defective Replace the main PCB.
- Code: F001
- Description: Flash ROM read problem
- Causes:
- Remedy: < User Check > - Turn the power OFF and ON.
1 Program malfunctioning Re-load the firmware.
2 Main PCB defective Replace the main PCB.
- Code: FD00
- Description: Firmware verification during the self test fails.
- Causes:
- Remedy: < User Check > - Turn the power OFF and ON.
1 Program malfunctioning Re-load the firmware.
2 Main PCB defective Replace the main PCB.
- Code: FD01
- Description: System resource error
- Causes:
- Remedy: < User Check > - Turn the power OFF and ON.
1 Program malfunctioning Re-load the firmware.
2 Main PCB defective Replace the main PCB.