PrintCopy.info service

Brother DCP-L5602DN

Error Codes List page 25

  • Code: E900
  • Description: An error occurred while initializing the NFC.
  • Remedy: 1 Connection failure of the panel flat cable Reconnect the panel flat cable. 2 Connection failure of the NFC flat cable Reconnect the NFC flat cable. 3 Panel PCB failure Replace the panel PCB ASSY. 4 NFC PCB failure Replace the NFC PCB ASSY. 5 Main PCB failure Replace the main PCB ASSY.
  • Code: EC00
  • Description: A USB device not within the specification is connected to the USB terminal, resulting in over current.
  • Remedy: • Disconnect the USB device from the USB flash memory port and turn the machine OFF. Turn the machine ON again after a while. • Replace the USB device with a different one.
    1 USB host PCB failure Replace the USB host PCB ASSY. 2 Main PCB failure Replace the main PCB ASSY.
  • Code: ED00
  • Description: Failed to authenticate the firmware for the self test.
  • Remedy: • Turn the power switch OFF and then ON again.
    1 Main PCB failure Replace the main PCB ASSY.
  • Code: EE00
  • Description: Failed to authenticate the NVRAM for the self test.
  • Remedy: • Turn the power switch OFF and then ON again.
    1 Main PCB failure Replace the main PCB ASSY.
  • Code: F900
  • Description: The spec code was not entered correctly.
  • Remedy: 1 The power was turned OFF while function code 74 was running. Reenter the spec code. 2 Main PCB failure Replace the main PCB ASSY.
Service manual
Error Code
Parts Catalog
Compatibility
Home
New Register Forgot Password?
Send message to us