PrintCopy.info service

Brother DCP-L2540DW

Error Codes List page 10

  • Code: A400
  • Display: Cover is Open Close the ADF Cover, then press the Stop Key.
  • Description: The ADF cover sensor detected that the ADF cover was open.
  • Remedy: <User Check> • Close the ADF cover correctly. 1 ADF cover actuator caught in some sections of the machine Reattach the ADF cover actuator. 2 Connection failure of the ADF cover/document detection sensor PCB harness Reconnect the ADF cover/document detection sensor PCB harness. 3 ADF cover sensor failure Replace the ADF cover/document detection sensor PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY.
  • Code: A500
  • Display:
  • Description: When scanning the fax, white or black correction data for the first side CIS was not within the correct range. (First time)
  • Remedy: 1 Incorrect correction data for first side CIS Execute Set CIS scan area (function code: 55). 2 First side CIS unit failure Replace the first side CIS unit. 3 Main PCB failure Replace the main PCB ASSY.
  • Code: A600
  • Display:
  • Description: When scanning the fax, white or black correction data for the first side CIS was not within the correct range. (Second time)
  • Remedy: 1 Incorrect correction data for first side CIS Execute Set CIS scan area (function code: 55). 2 First side CIS unit failure Replace the first side CIS unit. 3 Main PCB failure Replace the main PCB ASSY.
  • Code: A700
  • Display: Print Unable A7 Turn the power off and then back on again.
  • Description: Color parameter in the ROM does not match the first or second side CIS.
  • Remedy: <User Check> • Install the latest firmware. 1 Second side CIS unit failure Replace the second side CIS unit. 2 First side CIS unit failure Replace the first side CIS unit. 3 Main PCB failure Replace the main PCB ASSY.
  • Code: AC00
  • Display:
  • Description: When scanning the fax, white or black correction data for the second side CIS was not within the correct range. (First time)
  • Remedy: 1 Incorrect correction data for second side CIS unit Execute Set CIS scan area (function code: 55). 2 Second side CIS unit failure Replace the second side CIS unit. 3 Main PCB failure Replace the main PCB ASSY.
  • Code: AD00
  • Display: Scan Unable Remove the original document. Turn the power off, then on again.
  • Description: Image processing cannot be completed correctly because the number of pixels required for image processing is insufficient in the scanned data for the first side of the document.
  • Remedy: 1 Incorrect correction data for first side CIS unit Execute Set CIS scan area (function code: 55). 2 First side CIS unit failure Replace the first side CIS unit. 3 Main PCB failure Replace the main PCB ASSY.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us