Description: There is no paper set in the manual feed slot on the manual feed slot printing.
Remedy: <User Check> • Set the paper in the manual feed slot. 1 Registration front actuator caught in some sections of the machine Reattach the registration front actuator. 2 Connection failure of the registration front/rear sensor PCB harness Reconnect the registration front/rear sensor PCB harness. 3 Registration front sensor failure Replace the actuator holder ASSY. 4 Main PCB failure Replace the main PCB ASSY.
Code: 8E01
Description: Paper size is not set as A4/Letter/Legal/Folio when receiving fax or printing a list/report.
Remedy: <User Check> • Set A4 or Letter-size paper. 1 Registration rear actuator caught in some sections of the machine Reattach the registration rear actuator. 2 Registration rear sensor failure Replace the actuator holder ASSY. 3 Main PCB failure Replace the main PCB ASSY.
Code: 8E02
Description: Detected that the size of paper set in the paper tray was over 10 mm shorter than paper size set in the machine during faxing or printing a list or report.
Remedy: <User Check> • Set A4 or Letter-size paper. 1 Registration rear actuator caught in some sections of the machine Reattach the registration rear actuator. 2 Registration rear sensor failure Replace the actuator holder ASSY. 3 Main PCB failure Replace the main PCB ASSY.
Code: 9001
Description: The size of paper loaded in the MP tray and the one specified from the driver are not same when paper is fed from the MP tray.
Remedy: <User Check> • Change the driver setting to be matched with the size of the paper set in the paper tray. 1 Registration rear actuator caught in some sections of the machine Reattach the registration rear actuator. 2 Registration rear sensor failure Replace the actuator holder ASSY. 3 Main PCB failure Replace the main PCB ASSY.
Code: 9002
Description: The size of paper loaded in the paper tray and the one specified from the driver are not same when paper is fed from the paper tray.
Remedy: <User Check> • Change the driver setting to be matched with the size of the paper set in the paper tray. 1 Registration rear actuator caught in some sections of the machine Reattach the registration rear actuator. 2 Registration rear sensor failure Replace the actuator holder ASSY. 3 Main PCB failure Replace the main PCB ASSY.
Code: 9201
Description: When printing from the MP tray, paper type setting in the machine does not match the setting in the driver.
Remedy: <User Check> • Use the same paper type setting for the machine and driver. 1 Malfunction of the main PCB Install the latest main firmware. 2 Main PCB failure Replace the main PCB ASSY.