PrintCopy.info service

Brother DCP-L2530DW

Error Codes List page 16

  • Code: E600
  • Description: Write error in the EEPROM of the main PCB ASSY
  • Remedy: 1 Main PCB failure Replace the main PCB ASSY.
  • Code: E701
  • Description: System error in the flash ROM
  • Remedy: 1 Main PCB failure Replace the main PCB ASSY.
  • Code: E702
  • Description: Read error in the flash ROM
  • Remedy: 1 Main PCB failure Replace the main PCB ASSY.
  • Code: E900
  • Description: An error occurred while initializing the NFC.
  • Remedy: 1 Connection failure of the panel flat cable Reconnect the panel flat cable. 2 Connection failure of the NFC flat cable Reconnect the NFC flat cable. 3 Panel PCB failure Replace the panel PCB ASSY. 4 NFC PCB failure Replace the NFC PCB ASSY. 5 Main PCB failure Replace the main PCB ASSY.
  • Code: F900
  • Description: The spec code was not entered correctly.
  • Remedy: 1 The power was turned OFF while function code 74 was running. Reenter the spec code. (Refer to “Configure for country/region and model (Function code 74)”) 2 Main PCB failure Replace the main PCB ASSY.
    Memo: . For non touch panel models, simultaneously pressing the [*] and the [#] clears the error display under error code F900 display, and then the maintenance mode can be selected again. . For touch panel models, pressing the [*] or the [#] clears the error display under error code F900 display, and then the maintenance mode can be selected again. . For DCP models, press the ▲ or ▼ the under error code F900 display to select the maintenance mode.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us