PrintCopy.info service

Brother DCP-J132W

Error Codes List page 11

  • Code: E0
  • Display: Unable to print E0
  • Description: Modem does not start normally even after resetting the modem.
  • Remedy: 1 MJ PCB harness connection failure Reconnect the MJ PCB harness. 2 MJ PCB defective Replace the MJ PCB ASSY. 3 Main PCB defective Replace the Main PCB ASSY.
  • Code: E3
  • Display: Unable to print E3
  • Description: Wireless LAN MAC address unregistered, Wireless LAN PCB initialization failed.
  • Remedy: 1 Wireless LAN PCB ASSY connection failure Reconnect the Wireless LAN PCB ASSY. 2 Wireless LAN PCB ASSY defective Replace the Wireless LAN PCB ASSY. 3 Main PCB defective Replace the Main PCB ASSY.
  • Code: E6
  • Display: Unable to print E6
  • Description: An error occurred in the E2PROM of the Main PCB.
  • Remedy: 1 Main PCB defective Replace the Main PCB ASSY.
  • Code: EC
  • Display: Unable to print EC
  • Description: LCD unit firmware version mismatch detected.
  • Remedy: 1 LCD PCB harness connection failure Reconnect the LCD PCB harness. 2 LCD PCB defective Replace the Control panel ASSY. 3 Main PCB defective Replace the Main PCB ASSY.
  • Code: ED
  • Display: Touchscreen Init. Failed
  • Description: Touch panel initialization failed.
  • Remedy: 1 Touch panel PCB defective Replace the Control panel ASSY. 2 Main PCB defective Replace the Main PCB ASSY.
  • Code: FE
  • Display: Unable to print FE
  • Description: ROM data acquisition error.
  • Remedy: 1 Program malfunctioning Re-load the firmware. 2 Main PCB defective Replace the Main PCB ASSY.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us