PrintCopy.info service

Brother DCP-J125

Error Codes List page 2

  • Code: 40
  • Description: The casing internal temperature thermistor has detected abnormal temperature in the machine.
  • Causes:
  • Remedy: Main PCB defective Replace the main PCB. Casing internal temperature thermistor defective Replace the ink refill ASSY.
  • Code: 42
  • Description: The head drive voltage has not dropped from the high to low level within the specified period.
  • Causes:
  • Remedy: Piezoelectric ceramic actuator or head driver defective Replace the head/carriage unit. Carriage PCB defective Replace the carriage PCB ASSY. Main PCB defective Replace the main PCB.
  • Code: 43
  • Description: The head thermistor has been opened or shorted abnormally.
  • Causes:
  • Remedy: Head flat cables not connected correctly Correct those flat cables. Head flat cables broken Replace the carriage PCB ASSY. Carriage PCB defective Main PCB defective Replace the main PCB.
  • Code: 44
  • Description: The temperature of the print head driver has risen abnormally. The head driver chip temperature sensor in the head driver detects abnormally high temperature.
  • Causes:
  • Remedy: Head property parameters incorrect in the EEPROM Enter the correct parameter values. Air bubbles in the head/ carriage unit Perform the initial purge. Head flat cables and carriage-head flat cable not connected correctly Correct those flat cables. Head flat cables broken Replace the carriage PCB ASSY. Carriage-head flat cable broken Replace the head/carriage unit. Head/carriage unit broken Main PCB defective Replace the main PCB.
  • Code: 46
  • Description: The number of performed purge sequences has reached the limit. The ink absorber box may be filled with drained ink.
  • Causes: Purge counter overflown
  • Remedy: Replace both the ink absorber box and flushing box and reset their counters. (When you need to replace the ink absorber box or flushing box, replace both.)
  • Code: 46
  • Description: The number of flushing operations has reached the limit. The flushing box may be filled with drained ink.
  • Causes: Flushing counter overflown
  • Remedy: Replace both the ink absorber box and flushing box and reset their counters. (When you need to replace the ink absorber box or flushing box, replace both.)
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us