Causes: • Transfer Belt (PL6.1.7) • MCU Board (SFP PL8.2.13; MFP PL8.3.6)
Remedy: 1 Does the error still occur when the power is turned Off and On? Go to step 2. Complete. 2 Using Printer Diagnostics, check the life count value of the Transfer Unit: Printer Diag > Parameter > Life DTB Waste > Read. Do the values returned indicate near end-of-life (100 K)? Does the life counter value indicate near end of life? After replacing the Transfer Belt , initialize the life counter value: Printer Diag > Parameter > Life DTB Waste > Read Replace the MCU Board.