Xerox WorkCentre 6015
- Code: 077-900
- Description: Exit Jam Paper remaining at the Exit section of the Printer was detected.
- Causes: • Fuser, PL5.1.1 • MCU Board, PL7.2.2
- Remedy: 1 Check connector P/J18 on the MCU Board. Is the connection secure? Go to step 3. Secure the connector, then go to step 2. 2 Does the error persist? Go to step 3. Complete. 3 Enter diagnostic mode and run the Exit Sensor test (see page 4-23). You can also use the CE Diag Tool to run this test (see page A-8). Does the number on the display change each time the actuator of the Exit Sensor is operated? Go to step 4. Replace the Fuser and go to step 4. 4 Does the error persist? Replace the MCU Board. Complete.
| Error Code | |
| Service Mode, Troubleshooting | |
| Parts Catalog | |
| Compatibility | |
| Downloads Files | |
| Home |
Send message to us